Chopper Chopper Motorcycles, page #25

Very nice custom chopper with a 127 CI S&S motor & Trans. This is a softail bike with a good ride. I am not that knowledgeable on these bikes so I cannot tell you a whole lot of technical aspects of the bike other than engine size,127 CI S&S, rear tire size, (250) and that it is very sharp and practically new.

Beautiful Custom build chopper- new tired, new pipes-runs great! must see, serious buyers only-     Easy Rider replica museum quality /Dennis Hopper but a daily driver

  2007 ASPT (assembled from parts) BOBBER Multiple Show Winner (40+/- local trophies)   I'm selling this bike because I was in a near-fatal accident on my other bike over a year and a half ago and I can't ride any longer. It was maintained meticulously and never abused. If not for the accident, it would not be for sale.

2006 John custom chopper!  Only 555 original miles!  In almost mint condition!

This motorcycle is absolutely gorgeous and surprisingly easy to ride, handles the best of any of my choppers..I LOVE MY BIKE!! I don't really want to see it go but have others that I ride more now. Currently it's featured in the summer edition of "Chromed Out" mag .com  Features:124 cubic inch S&S Sidewinder that was custom tuned when built..runs better then a reg 124"Shorty stack intake280 rearbelt driven open primaryBaker 6 SpeedDakota Digital speed-oIntegrated blinkers in mirror and tail stripNo odometer..estimated miles is 4-5k Pictures never do it justice!!

this is on bad chopper, it has the best of everything and built by the best. shannon davidson at the chop shopp put the bike together, gasoline arts the painter for jesse james done all the air brushing. the bike has been rode around for some photos which it has about 14 miles on it.

39 MM narrow glide front fork-dual 11.5 floating disk w/ 6 piston calipers-(N) 21" 60 spoke wheel (N) 21" tire-custom headlight w/ working high beam indicator-custom LED in frame blinkers-Flanders handel bars cut narrowed plugged re-chromed (just like 1965)-custom flat bottom sportster tank w/ high flow petcock-custom seat w/ air ride (on-board compressor)-Bates rear seat (1965)-custom rear fender cut  / sectioned to follow radius of rear wheel-custom passenger foot pegs fabricated from  pan-head brake clevis (very small very unique) Custom sissy-bar w/ cats-eye taillight- 18" rear 60 spoke wheel w/ 180 tire in great condition-rear 11.5 floating disk w/ 6 piston caliper-custom one of a kind mid controls- custom exhaust 1.75 to 2.25 w/ heat shields-3.5 Primo belt drive w/ lockup clutch-(N) Lectron 50mm carburetor-Jims 120" twin-cam- 680 T-man gear drive cams-heads flowed to twice the volume of 120" Screamin Eagle heads w/ 4 spark plugs-all other motor parts, roller rockers lifters push rods oil pump etc. are high performance  supplied by Jims Racing (so cal)- Jims 5 speed w/ pro-cut gears- o-ring chain-Crane Hi-4 ignition custom mounted-Paco frame no stretch no rake (1965) modified w/ custom gussets and stroker bars-custom paint and striping is beautiful and period correct for a 1965 build.   Approximately 6500 total miles (no odometer).  Maybe 250 after (N)  carb and cams  Last dyno 130 hp and 145 ft lbs tork.

$100 deposit non refundable, Buyer can do a Full inspection on site in Crowley Texas, Payment after complete inspection.  The bike cost $20K to build. THE PICTURES ARE OF THE ACTUAL BIKE FOR SALE. FRAME: CUSTOM BUILT RIGID 300; DOUBLE DOWN TUBE FRONT END: WIDE GLIDE ENGINE: 113 S&S SUPER POLISHED W/ EXOTIC PAN BOY KIT TRANS: BAKER RIGHT SIDE DRIVE; CHROME PRIMARY DRIVE: BDL BLACK ANODIZED W/ CUSTOM MACHINE WORK REAR FENDER: CUSTOM FIT TANK: METAL SHOP CUSTOMS; CUSTOM TANK FOOT CONTROLS: TOP SHELF MID CONTROLS; BLACK ANODIZED W/ HYDRO SUICIDE CLUTCH & BRAKE HAND CONTROLS: INTERNAL THROTTLE BRAKES: SPROTER REAR BRAKE PIPES: METAL SHOP CUSTOMS; DRAG PIPE HI SIDE HANDLEBARS: MINI APEHANGERS; 12" CUSTOM MINI "Z" STYLE; CHROME SEAT: BLACK SPRING SEAT PAINT: CANDY TANGERINE ORANGE W/ GRAPHICS AIR CLEANER: RSD VTECH; BLACK ANODIZED   THIS IS A SHOW BIKE THAT HAS WON MANY SHOWS AND IT IS LOUD, FAST, FUN.

brand new build only test miles have all mso to register at dmv   all new components  turn key //twin cam engine// ready for spring season //only ridden locally to shows have all mso  papers to register at dmv twin cam powered  //6 speed //molded 400 hrs on metal fab //call 585 544 9924 mike for more info //drives ez set up to ride n show too   started as a complete roller from fatmans cycle ///ss cased//oem harley twin cam inners // ultima driveline //thunderheart breaks //330 rear //21 ftr //fully molded //just got back from bike there was only a few bikes w/ this detail //paint has ghost tribal images //shines like new but a few flaws not perfect but close //u have to really look to find //starts drives like it should //have 3 mso needed to register //has hyd clutch all new components ///none used   n

2003 CUSTOM MOTORCYCLE CHOPPER BUILT BY LAKE NORMAN V -TWIN 124 S&S POLISHED MOTOR  6 SPEED TRANSMISSION PRO 1  DAYTECH ,SOFT TAIL CHASSIS CAROLINA CUSTOM CHROME WHEELS, 250 REAR TIRE  EEL SKIN SEAT, 5400 MILES This bike cost $ 52,000.00 new! Show winner at Bike Shows!  This bike not only looks good it rides good, and is definitly a head turner!

The Husker Chopper is truly one of a kind.  This is the only Chopper in the USA that is Collegiately licenced.  This motorcycle was designed from the ground up and includes Custom Wheels designed with all of the Championship year plaques and footballs.  Custom Grips and foot-pegs lathed out and covered with pigskin.  We have commermorative coins in the triple trees.  The Custom seat was designed and covered with pigskin and Husker panels used to make all of the Husker Footballs (sent to us by Wilson Sporting Goods of Ohio).  Custom struts, for additional safety and strength, custom fenders, steel extended (fenders) and lead work applied for extra strength, rear fender has a recessed N for a tail light.  The Frame is powder coated, and this bike has a complete custom paint work.  Custom Forks and triple trees and is powered by a 113 Cubic Inch 120HP Ultima engine.   More pictures available upon request and we will take all reasonable offers.  Email: dprochello@longlines.com  Delivery available anywhere in the USA.

Height from ground to seat-24" from ground to top of handlebars 48" length-116'" This motorcycle was built by Custom Cycle Creations located in Encinitas, CA. 2007 Moto Expo San Diego Best In Class Winner for EVO Hardtail Custom " Radical� class Bike has about 1500 miles on it. Kamen Blue Metal Flake with Lime Time Green pearl flames.

This is my personal  ride and I built it when I started my shop to show what I could do. I really don't want to sell it but need the money to move on to other projects and help to move my shop to the next level. This bike runs perfect and is very fast.

This bike is a Paughco Swedish Style Frame Up 4" and out 2".  The wheels are PM Wrath wheels and matching rotors using Brembo Calipers on front and rear.  The engine and transmission are Harley Davidson Evolution and 5-Speed with a Bearing support and a 3" Belt drive tying them together.

Custom built for PGA Pro Golfer Kenny Perry, 1200 miles, 113" Ultima Polished engine, 6 speed, belt drive, softail frame, RC Component wheels, 250-40-18 Rear tire, 90-90-21 Front tire, candy orange w/ ghost flames. This bike has a lot of look and would be great for bike night or a cool piece for your garage or business. Bike is for sale locally and I reserve the right to end auction if it sells.

 Awesome Old School Look Custom "Horny Mike" Rhino Lining Style Paint 10 Inch Z bars Diamond Cut Spoke Wheels Brand New Three Wire Ignition(Drag Specialties) Brand New Harley OEM Sporster Battery Brand New Air Filter Fresh Oil Change/Service 85% Rubber This Bike Always Turns Heads!!! If Your Local, Bike is at My Family Shop Brown's Cycle 5223 Military Pkwy, Dallas, TX 75227 972-381-9910 Stop In, Ask for David( My Uncle) Have a look, Take it for a spin

Custom pro street Saxon chopper soft tail if interested contact at 509-844-4643 Saxon frame tank and fenders RB custom built the bike S&S 111 Brand new Baker 6 speed transmission  Right side belt driven Brand new wire harness Brand new starter Custom 4" open primary with tribal cover black Gladiator wheels 21 front 18 rear 300series black Custom spike turndown exhaust black Custom triple tree anodized black Custom inverted forks anodized black Custom bars black Custom spike grips black Custom controls black Custom clutch and brake handles black Custom spike head light black Custom gas cap black Custom spike forward controls Custom stealth spike air filter black  Custom spike choke Custom alligator seat Custom gladiator sprocket  Custom plate bracket Custom breaded lines black LED tail lights Custom house of color paint Gladiator roders front and rear

2003 TITLED BIKE NO YELLOW STICKER HERE, 2 HOURS ON A BRAND NEW 127 ULIMATE EL BRUTO MOTOR. 45DEGREES IN FRAME 5 DEGREES ON TREES. 240 REAR TIRE SINGLE SIDED SWING ARM.  NEW YORK M/C COMPANY BIKE.  WAS GOING TO PAINT IT BUT IT TURNS TO MANY HEADS WAS IN EASY RIDER MAGAZINE ON MAIN STREET DAYTONA COUPLE YEARS BACK.

Very nice and absolutly one of a kind bike custom painted with dollar bills and liberty deamon . Lots of expensive parts used on this chopper Please kontackt me for more info . shipping cost .

Custom motorcycle built by Swift for Daytona bike week bike show. One of a kind custom paint work. Assembled with top of the line Harley-Davidson hard parts.

The absolute best motorcycle I've ever owned. Never thought the day would come that I would see it go, but selling because I have my first kid on the way! Bike started as a 2004 BMC Hooligan 541 and has over the years received several hours and dollars of custom work.

This is a 2008 Custom Built; G&G Corporation, Dark-Horse "BISON", Chopper ! The assembly was done by Alpha Cycles in Bismarck, North Dakota . This Bike is owned by a NBA Player, who was playing with the Miami Heat !

 First and foremost I do not want to sell my dream bike!! However, I had recently a life threatening blood clot in my left leg and Im no longer medically allowed to ride. So before you ask me why Im selling it....theres your answer- LOL The motor is an Ultima El Bruto 100" engine which runs perfect.

Shovelhead chopper in a hardtail frame. Frame by Paughco, springer front end by Paughco. Risers by Paughco, oil bag by Paughco. Performance Machine handlebar controls, Performance Machine brakes.

    2010 Harley Davidson Custom Chopper. One of a kind   1.)   Was created in 2010 from the ground up.           All engine and motor components are           Harley Davidson original and in top condition.   2.)   The seat is King and Queen seat is custom by Mike Corbin           with seamless tank and fenders by Jesse James.

2007 Custom Pro Street Chopper Rigid Chopper has all big tube framing, 300 back tire, 6 speed transmission, & Harley Davidson crate motor. One owner since new.  Mileage is approximate as there is no odometer.  Mileage is approximately 2,500 miles.  Will be glad to answer any & all questions.  I do have a shipper available.  Please email me with your location & I will provide a shipping quote if needed.  If you are close & want to inspect prior to purchase, we can arrange that, but very serious inquires only. $2,000 deposit due within 48 hours of end of auction via PayPal or cash if in person.  Full payment is due within 7 days of auction end via Cashiers Check drawn on national bank that I can verify or cash if in person.  Motorcycle and title will not be shipped until payment fully clears. 

  2004 Ultima Fat Bastard Custom Built Chopper   799 miles 113CI Ultima Engine dual compression V-Block, Open Primary, S&S Carburetor Spoke Wheels Back Rest for Front Seat All Custom Controls   New Tires New Brakes New Turn Signals New Speedometer New Battery Rebuilt Master Cylinder   Black with Purple Flames   Clear Reconstructed (due to being a custom bike) Title   It is preferred that you ask all questions before bidding as each bid is a contract to buy this vehicle. Local inspection on site is welcome with advance notice. TERMS: A Non-Refundable Paypal Deposit of $1,000.00 is due within 24 hours from end of auction.

THIS IS A NO RESERVE AUCTION: Custom built rigid frame, stretched and raked. Custom Invader 5 spoke wheels. Custom twisted chrome springer front end.

2007 Paul Yaffe Custom Chopper.  This bike has less than 4500 miles on it. It boasts a beautifully custom painted Paul Yaffe frame,  a 96 cu. in.

Beautiful 2004 Swift Chopper, fully registerable and insureable. 113 cubic inch, Very low milage, Runs great, Buyer to pick up or pay for shipping. Cash, money order or cashiers check only.

   Motivated Seller!!!  Do not pass this opportunity up to own one of the nicest built custom bikes by one of the worlds best builders for a fraction of the cost to build.  This is the real deal.  Need money to complete other project and bike just not getting the attention it needs.  It needs to be ridden and shown will attract a crowd where ever it is.   For sale is a custom built chopper by world class bike builder Eddie Trotta.  Completely fabricated and custom built with a 102 CU S&S panhead motor, Baker 6 spd trans in 4 speed case.  Both electric and kick start.  Frame custom built with rear fender all one piece.  A lot of one off parts fabricated by Eddie Trotta and his team of builders.  Painted by "Bones" Tolson.   Nothing but the best in parts and workmanship went into this build.  This is a world class bike that will take 1st place where ever it is shown.  Bike was 60k to build (have all documentation).  Perfect for any collection.  Bike is a turn key and runs as good as it looks with only 500 break in miles.  Bike was part of a 35 Vehicle collection that has been dissolved.  Serious buyers only, any photos, or questions or would like to discuss a legitimate offer please email or call 508-725-2764.   Take a good look at the machines off Eddie Trotta's Thunder Cycle Design www.thundercycle.com  and you will see the attention to detail, the imagination, craftsmanship, and the perfection that places Eddie's custom bikes in a class all of their own.   I will pay for shipping within the lower 48 states!!!! 

2008 Frame-  S&S Motor, Baker Transmission & Baker Primary with King Kong Clutch all purchased less than 1 year ago," New". The parts listed below were purchased brand new about 9 months ago & professionally installed on this bike..S&S V111 MotorBaker 6 Speed overdrive transmission, "neutral down, 6-up".Baker Function Formed Primary with King Kong ClutchMetzler tires, 260/40 VR 18 Rear, Metzler 120/70-21 Front.PM hand controls.New wiringNew cablesNew Headwinds HID Ballast Gladiator Headlamp Assy.New American Suspension Front EndNew Custom Made & Ceramic Coated from Exotic choppers, 2 into 1 ExhaustJeffrey Phipps Custom SeatNew StarterNew fuel linesNew brake pad's, front & backNew Battery New Compu-fire 3 phase charging systemNew StarterNew Arlen Ness GripsMatt Hotch Flush Mount Fuel CapSeveral other little thing's as well.. Item's freshly powder coated about 1 year ago:PM front & back heathen rimsPM forward controls & foot peg'sPM Brake Caliper's Frame, tank & rear fender freshly painted about 1 year ago..

final Santiago Chopper SCSP Titled ____________________________________________________________________ The over 100Hp ULTIMA engine combined with a 3 inch BDL Belt Drive System Bandit Clutch and a RSD Baker Transmission gives this bike more power than it you ever need. Runs straight and clean even at high speeds . 18 Over front end in sculpture Billet Blue headlight 4 Piston front brake Single downtube frame Billet 4 piston rear brake sproket 60 Spoke front and rear american spoke wheels LED in Frame taillights with side mount tag bracket Digital Gauge & Oil Pressure Gauge Titled as Santiago Chopper ready to be insured and registered Gator Seat with Gel insert Everthing chrome Billet or Stainless Steel and much much more This bike is easy to register and insure comes with Santiago Title .

2013 Custom Chopper. This is one fast chopper with the best parts, that has less then 200 miles on it, it hasn't even been licensed yet. It is powered by a Revtech 100 Cubic Inch motor which is equipped with roller rockers and a 560 Lift Cam that gives it a nice sound out of the shotgun style pipes.

Up for sale is a very famous, one of a kind, well documented West Coast Chopper. This is the El Diablo Model that was hand built by Jesse James himself and documented on the discovery channels first "Motorcycle Mania". It was also featured in the August 2001 issue of American Iron, taking the cover and having a five page spread within the magazine.

NICE 2012 CUSTOM BUILT CHOPPER WITH ALOT OF GOOD PARTS ON IT .THERE WERE NO CORNERS CUT WHEN THIS BIKE WASBUILT. 113 INCH ELBRUTO MOTOR 120 HP BAKER 6 SPD TRANS BAKER RIGHT SIDE DRIVE 300 REAR TIRE WITH SINGLE SIDE ROTOR AND PULLEY INVERTED FRONT END 3 INCH OPEN PRIMARY THIS BIKE IS ALL ATTITUDE .U WONT SEE ANOTHER ONE LIKE IT   CALL KEN 407-948-5853 FEEL FREE TO COME INSPECT BEFORE BIDDING

2013 base model drop seat hot rods  by Big Tony's Chopp Shop We are the the mid-wests number one custom bike shop and we build the baddest custom choppers in the country. We are a federaly liscenced manufacturer and issue titles with our bikes. Like these bikes pictured, they are examples of our popular base model chassis from entry level to all out radical.

Too much to list  Carlini drag bar w/ new cables, two seat s everything polished or chrome,alum.wheels w/matching brake kit. Vance an Hines Two into one header.Tires like new

 Ex-Show Bike AMAZING! Panhead / Shovelhead Rigid One Off Chopper. NO RESERVE!!!!

You are bidding on a beautiful, 2005 "Sir Francis" by Matt Hotch Chopper Patrick Racing 114cu in. in stock now.  Ready to ship. This is the bike that has redefined the “Exotic” class with loads of power through out the RPM range and nothing sacrificed when it comes to the turns.

The auction winner fell through so I am re-listing this collectable chopper for sale, and with a substantially lower 'Buy It Now' price!Particularly if you are from outside of the United States, PLEASE READ THE TERMS before bidding!! I will not make exceptions for you just because you are from the Netherlands or wherever!Feel free to contact me with any questions or concerns, and Thank You for reading!   -Ken The Broadway Chopper was the grand prize in a $50,000 charity raffle held by the ESTA Foundation in 2007 to benefit theatre's 'Behind The Scenes' workers who become injured on the job.

2007 Orange County Chopper Web Bike Prototype that was built on "American Chopper" the series on the Discovery Channel.  This is THE REAL DEAL actual bike that was built on the show; this is NOT a production web bike!  The bike was hand fabricated and built by the cast of the show Paul Teutul Jr., Paul Teutul Sr., Mikey Teutul, Vincent DiMartino, Jason Pohl,  Rick Petko, & Michael Amorati.  The story behind the bike is that I purchased the bike from the gentleman who originally won the bike in the "Rolling with The Teutuls" Sweepstakes.  The premise of the sweepstakes was that Paul Sr. would have a bike build off against Paul Jr. to see who could build the better bike.

Custom built from the ground up chopper,  Built 2008 Hard tail,All matte black body and frame with a custom springer front end. Jesse James custom tankHarley 96SS motor with open cam shafts, Engine was rebuilt just 3000 miles ago.320 on the rear and Custom mini pipessolo alligator skin seatPerfect amount of positive rake on the front end for a super stable ride without sacrificing the chopper design Everything about this machine is fully custom, beautiful detail small details throughout the whole bike. Definitely one of a kind!!  I will be uploading more pictures in the next day if you have any quesions feel free to email me. The bike is located in San Diego and can be shipped anywhere as long as wining bidder pays for all transport costs. 

tiftonhd Store 2006 Custom ChopperBuilt By Revolution ManufacturingModel: Razor Hardtail 100 Cubic Inch Engine w/ a rev tech 6 speed trans. Miller High Life PaintTrue Miles UnknownColor: Gold If you have any questions about this motorcycle please contact Mitchell Weldon @ 229-392-0759

2005 PITBULL CUSTOM BUILT CHOPPER WITH 913 MILES,127 CUBIC INCH ULTIMA 140 HORSE POWER,6 SPEED BAKER TRANSMISSION,RIGHT SIDE CHAIN DRIVE,BDL OPEN PRIMARY,HYDRAULIC CLUTCH,COMPRESSION RELEASES,MIKUNU 48 MM CARB,300 MM REAR TIRE,GRUMPY KINGPIN PIPES,DROPSEAT CUSTOM ALMOST 11 FEET LONG,48 DEGREE RAKE,5 DEGREETREES, INVERTED 63 MM FORKS,EXTENDED SINGLE CURVE DOWN TUBE,SHARK FIN,ACCUTRONIX FORWARD CONTROLS AND GRIPS,CUSTOM CHROME WHEELS,EVERYTHING IS SHOW POLISHED AND CHROMED,8 INCH UPSTRETCH,5 INCH OUTSTRETCH IN BACK BONE,GAS TANK IS FULLY STRETCHED,STAGE 3 FABRICATION INTO OIL PAN AND FRAME,MULTI STAGE PAINT SILVER TO PURPLE TO DARK BLUE CANDY OVERSPRAY,PAINT ALONE IS $8500.00.LED LIGHT KIT,NEW INSPECTION,OVER $53,000.00 INVESTED,THIS IS NOT A BIG DOG PITBULL,THIS IS A PITBULLTHIS BIKE IS LOUD AND FAST AND WILL TURN HEADS EVERYWHERE IT GOES

Certified Big Bear 300 Sled Chopper with custom paint job. Less than 1000 miles. S&S 113 pulling a BDL 3" open belt with primary chain.

really cool custom chopper/boober.......see pics

I purchased this bike directly from Texas.  I have a CD showing entire build by Joe Martin and his crew.  Only a few modification done to it so it would pass MA inspection.  I added Mirrors, air cleaner and changed license plate holder from vertical to horizontal.  The paint job alone was $15k.  This bike is a real head turner and gets tons of looks.