Vincent All Motorcycles, page #136

This switch is a very high quality, faithful copy of the Miller PR18G four position headlight switch as fitted to Vincent (and other) motorcycles. This is made in the United Kingdom from high quality materials and made to the correct original appearance and function. The original 4 positions were OFF, CHARGE, HIGH, LOW, but many people today fit the wrong three position Miller replica switches made in India & the Far East  (often the poorly made switches are sold in a container with the Union Jack on it!).

Three really cool Kiss buttons. The large button has no pin on the back but is in good shape. The one with the make up is a rare Vinnie Vincent button....

Vincent motorcycles required a special exhaust clamp which is no longer made or offered for sale.  The clamps(two are required for Shadow or Rapide) are immediately noticeable from modern, incorrect replacement items as they feature the hollow "boxes" one each end of the chromed, steel strap.  The "boxes" support the mounting bolt 1/4" BSF X 1 1/2" long hex bolt, washer and nut.Details are important in your Vincent as a show-winner as well as preserving it as a future investment.

Here we have a nice 100% authentic pair of Oliver Peoples Titanium 100 Vincent AUT 52[]17-138 Sunglasses (Made In Japan) Frame- Couple tiny spots of paint chipped on the top of the frame. Arms- Good condition! Light scratches!

Welcome to my auction !I am now stocking the finest quality Vincent wiring loom (harness) you will find.This harness is made with copper wire and is covered with cloth braiding to insure your Vincent has the proper look & function.Why try to make your own loom from modern looking wire from the hardware store, when you can buy the correct wiring product ready made & it really looks the part?This loom is American made by a craftsman in the industry & the wire connectors have been properly crimped & soldered to insure a long life & excellent conductivity.There will be some terminals that must be re-used from your original harness, but if you view the photos I have included, you will see the entire harness & the provided connectors.I have also included the cable that travels from the starter switch to the starter solenoid for those who have added an electric leg to their mighty Vincent.This loom is designed for the Series B & Series C Vincent motorcycles. If you are not completely thrilled by this harness, please return it for a "no quibble" full refund, that's how sure I am you will love the quality of this loom.Please be sure to see the many other unique vintage motorcycle items I carry including a number of Vincent specific items.

Free delivery on many items.   Same-day despatch, no-question returns.   Authorised dealers - full technical support.   Online since 1997. Home About Contact Payment Delivery Returns Help Sales & help: 020 7424 1960 ● ebay@juno.co.uk Visit our eBay store Shop categories Shop home Music Records CDs Storage & media accessories Sound & vision Performance & DJ equipment Headphones Musical instruments Pro audio equipment Accessories/ equipment DVDs, films & TV Information About Contact Payment Delivery Returns Help DEAF WISH St Vincent's(7" + MP3 download code) Sub Pop US Cat: SP 1116. Rel: 6 Oct 14 Indie Side 1 - Track 1.

This listing comprises mint and used stamps as shown in the attached scan. They were issued between 1955 and 1987.

A mint sheet and 4 stamps Please see my other items for sale

A newly made item for the Vincent enthusiast who is planning to dismantle the timing side of an engine. It is designed to pull the half time pinion off the drive side mainshaft using the off set screw holes. The puller is based on the one shown on page 114 of "Vincent" by Paul Richardson (Works Technical Information Officer).

          Built for Speed by John Griffith. Racing Book offers an impressive photo gallery of 24 Classic Racing Motorcycles.          Motorcycles Factory "Specials" include: The Last Work's Norton 350 / 500cc, Rickman Metisse 500cc, Chris Vincent BSA Outfit 500cc, 24 Hour Record Velocette 500cc, Les Archer Norton 500, Earles Ariel Four 500, Rotary Valve Norton Racer 500, Alf Hagon Kirby Special 350, MV Four 350/500, Norton Racing Four 125/500, Reg Dearden Supercharged Vincent 1000, The First Honda Racer 125, Greenwood Triumph Combination 500/650, The All Conquering Ariel 250, GMS 250, Beeton Harris BMW Outfits 500, Norton Special 500, Honda Four 250, Velocette Sprint Outfit 500, Bob Berry Projectile 1000, Beart Prepared Norton 500, AJS Porcupine 500 Twin, Francis Williams Norton JAP 1000, Greeves Triumph Scrambler 500.

This is a brand new set of five hex nut UNF. Each nut is made with one chamfered or beveled side and one flat washer face side. Please see picture for reference.

This is a new 8 piece Whitworth socket set 12 point, 3/8" drive, chrome plated. Sizes: From largest to smallest: 5/8BS-9/16W 9/16BS-1/2W 1/2BS-7/16W 7/16BS-3/8W 3/8BS-5/16W 5/16BS-1/4W 1/4BS-3/16W 3/16BS-1/8W Check out my other items! Be sure to add me to your favorites list!    

This is a brand new replica Lucas Altette horn bracket with two fitting hole. Part # 701639 Check out my other items! Be sure to add me to your favorites list!    

 new craven "concorde wide"saddlebags.   When I talked to Dave, he explained that if a beer can fits sideways, they were described as the wide bag. Has attachments that came with these bags.  I purchased these from dave quinn in 1990 and have been sitting on my shelf ever since.  Still in original box.  Thanks Greg 406-538-2733

PLEASE CALL 800-544-3746 FOR LIVE EXPERT TECHNICAL SUPPORT!   !!! PLEASE VISIT OUR EBAY STORE, FILLED WITH HUNDREDS OF UNIQUE AND USEFUL ITEMS !!!!

Offered here is a Miller PR18/2C headlight ring for the 7" sealed beam american market Vincent motorcycles. Fits a Vincent Comet, Rapide and Meteor, and Black Shadow.  Dont go to another bike show or bike meet with that blank incorrect headlight ring anymore, get the CORRECT stuff.

NEVER SEEN ONE LIKE IT! +- 1 1/4" DIA OUTSIDE LIGHT DIMENSION, 3/4 " AT THREADS. DEPTH ABOUT 2".

This is a set of five brand new CEI bolts. Fully threaded. Zinc plated finish.

 new craven comet saddlebags.  Has attachments that came with these bags.  I purchased these from dave quinn in 1990 and have been sitting on my shelf ever since.  Still in original box.  Thanks Greg 406-538-2733

This is a brand new set of four hex nut CEI. Each nut is made with one chamfered or beveled side and one flat washer face side. Please see picture for reference.

This is a new valve spring compressor. Part # 61-3341 Check out my other items! Be sure to add me to your favorites list!    

Gearbox/transmission camplate. Part number G32/3. Lightning pattern with holes to lighten. Reputedly saves weight and improves gearchanges due to less rotating mass.

Offered here are new Harris Vincent Gallery black and gold t-shirts.  The shirts are high quality fitted black 100% cotton t-shirts.  I have sizes medium, large and extra large so when you order one just let me know what sizes you want

This is a brand new stud CEI. Threaded on both ends. Zinc plated finish.

PLEASE CALL 800-544-3746 FOR LIVE EXPERT TECHNICAL SUPPORT! !!! PLEASE VISIT OUR EBAY STORE, FILLED WITH HUNDREDS OF UNIQUE AND USEFUL ITEMS !!!!

  UNKNOWEN SINGLE CYLINDER CYCLE MOTORLOOKS TO BE A VARY EARLY ONEHAS P6290 ON CRANK CASE I WAS TOLD IT IS A 1951 POWELL MOTOR CYCLE ENGINE SEE MESSAGE AT BOTTOM OF LISTINGHere is another email i got. Dear roadrashmotorsportsparts, It could be a 1949 thru 1951 Powell engine off a model P-81. It used a 4" Ford piston.

This is a brand new small grease gun. Used for most Vintage British bikes. Similar to accessory that comes with vintage bikes.

YOU ARE BIDDING ON A COPY, NOT AN ORIGINAL.   VERY RARE, PRINTED BY SMITHS IN THE MID 1950S. ABOUT 20 PAGES TOTAL.

This is a brand new replica Lucas 12 Volt Altette horn with cast iron body. Part # HF1234, 42-9046, 12 VOLT Fits: AJS 1945-57, Ariel 1936-55, Brough Superior 1939, BSA 1939-57, Douglas 1947-50, Royal Enfield 1936-57, Matchless 1936-57, Norton 1936-57, Panther 1946-57, Sunbeam 1936-57, Triumph 1938-48, Vincent 1951-54        Check out my other items! Be sure to add me to your favorites list!    

                               The Art Of Motor Cycling by W.C. Haycraft.                 A practical guide for novices and experts, covering motor-cycles.

This is a brand new replica Lucas 6 Volt Altette horn with cast iron body. Part # HF1234, 42-9046, 6 VOLT Fits: AJS 1945-57, Ariel 1936-55, Brough Superior 1939, BSA 1939-57, Douglas 1947-50, Royal Enfield 1936-57, Matchless 1936-57, Norton 1936-57, Panther 1946-57, Sunbeam 1936-57, Triumph 1938-48, Vincent 1951-54        Check out my other items! Be sure to add me to your favorites list!    

I don't know what this is for, it came in a large lot of British motorcycle parts I bought. I believe it's a Brampton girder truss, I belive Brampton girders were used on Vincent motorcycles, however I don't know what this came from. It may be NOS WWII stock.

Offered here is a rare collection of MPH issues from 1949(issue #1) to 2015. Out of the complete set, the collection is missing about 120 but has 20 plus extras. Great library to have if you a Vincent collector or even an enthusiast.

This is a brand new stud CEI. Threaded on both ends. Zinc plated finish.

This is a brand new set of five hex nut CEI. Each nut is made with one chamfered or beveled side and one flat washer face side. Please see picture for reference.

Replica Handlebar For Norton & Vincent Motorcycles Fits Many Norton Models Including:Flat Type Dominator 99, Atlas 650 models Fits Vincent singles & twins (1946-). Chrome plated! Handlebar Diameter: 7/8" diameter, 27 3/4" across.

This badge fits in British motorcycles from 40' 50'.This badge was made out of brazz,with raised letter and epoxi paint.I combine shipping!!!

For auction is a rare opportunity to own one of Triumph's most powerful flat track/TT racing motors of the 1960's, the 1967 Triumph 650cc TT special. Purchased this a few years ago as I own a matching numbers T120TT and the serial numbers were only a few apart so I knew it was the real deal. My thoughts were to build a real lightweight trackmaster framed bike to have fun on the street but still have too many projects.

Remember....Rare parts go quickly !!!! NEW OLD STOCK Doherty clutch lever for 7/8" handlebar. It measures 1 1/8" from pivot to center of cable end hole and blade is 6" long..

                        1938 Speed and How To Obtain It. This Manual is a guide for the sporting Motor Cyclist - for the rider who wishes the performance of his machine, whatever its design or capacity, to be high in its class. Its purpose is to help him understand and obtain the optimum performance from his entire machine.

            The Vintage Motorcyclists Workshop by Radco. A 247 Page Manual with 10 "How To" Chapters on the "Fine Points" of Motorcycle Repair & Restoration: Screw Threads: Whitworth, British Association (BA), British Standard (BSC), American Threads, Taps & Dies, Nuts & Bolts, Metals, Measuring Tools, Heat Treating, Ect. Cycle Parts: Wheel & Hub Rebuild, Jig Making, Rim Types, Brakes Types, Front Forks & Girder Rebuilds, Spring Frames & Spring Hubs Rebuild, Ect.

This is a brand new replica Miller chrome dip switch with horn button and four wire lead. Part # 157HV Check out my other items! Be sure to add me to your favorites list!    

             Practical Handbook by The Motor Cycle. Published in 1959 by Britain's largest Motorcycle Newspaper, is prepared to pass on practical, helpful information and advice on Motors Repairs, Motorcycle Maintenance, Riding, Ect. All the suggestion are based on long experience, many of then have come from famous riders, others from fellow readers and members of the motor cycle staff.

 Very good condition. 

The Vincent in the Barn Great Stories of Motorcycle Archaeology  It’s every motorcyclist’s dream.  A friend or acquaintance says, “You know, there’s an old bike that’s been sitting in this garage for years.”  The hunt is on.  And rather than the usual worthless Hondazukimaha pile of hopeless oxidation, at the back of that barn you find a genuine classic, the motorcycle collector’s dream.   The Vincent in the Barn tells forty such stories--tales of motorcycle hunting dreams come true.  From Ducatis in basements to Vincents abandoned in sheds, Harleys in barns to Brit bikes moldering behind urban garages, these are the stories that fuel every motorcyclist’s fantasies.  The only difference?  They’re true.  ________________________________________________________________________________ 265 Pages - Paperback Brand New Book - No Reserve! Save Money!

             Vincent Twins Motorcycle Super Profile by P. Bickerstaff. This book covers the Vincent with an affectionate, but objective Profile of this Popular Model, from its Development and Introduction, to its Gradual Maturing packed with Success to its inevitable ending.              1st Edition is Published in 1984 with 56 pages & nine chapters: Foreword History Evolution Specification Road Test Owner Views Buying Clubs Specialists & Books Photo Gallery                 Hard Cover Book has 99% clean pages, solid binding, Overall is in Very Good ++ Condition.