Motorcycles in Salt Lake City, Utah

YOU ARE BIDDING ON ONE BONANZA FRONT FORK BOLT PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON BONANZA NOS JAPAN FOOT PEG RUBBER (B) PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON  BONANZA KILL SWITCH PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

Seat is in poor shape.no damage to seat pan .pad damaged at tear in cover.

YOU ARE BIDDING ON ONE BONANZA MOTOR SPROCKET CHAIN PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA NOS REAR WHEEL FLANGED BRAKE DRUM PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA THROTTLE CABLE 4' 10'' PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

CLICK FOR MORE!!! 1971 Bultaco Alpina 250 Motor Number: PM-8506329 Frame Number: PB-8506329 Most of these parts will fit other years. Please check with your local dealer or favorite website, Thank you! Gas Tank Petcock is in Good shape, there are scratches as seen in the photos.

CLICK FOR MORE!!! 1971 Bultaco Alpina 250 Motor Number: PM-8506329 Frame Number: PB-8506329 Most of these parts will fit other years. Please check with your local dealer or favorite website, Thank you! Rear Wheel Axle is in Good shape, there are scratches as seen in the photos.

YOU ARE BIDDING ON BONANZA NOS HURST AIRHEART MASTER CYLINDER OVERHAUL 120 8310 PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON BONANZA NOS PALO ALTO HUB HALF (A) PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

' 1-844-232-9919 Combined Shipping / Lowest Prices FREE SHIPPING on all additional items! Thunder Tiger 2375 Watercooled Motor, Obl29/19, Outlaw, Desperado, Atlantic TTR2375             We sell Brand New, Factory Sealed items. All items included Warranty.

YOU ARE BIDDING ON ONE BONANZA CLUTCH PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA JACK SHAFT DRIVE SPROCKET PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA NOS THROTTLE TWIST PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA EXHAUST PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON BONANZA NOS HURST AIRHEART CALIPER OVERHAUL 02-8060 02-8213 12-8073 PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA CHAIN PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON BONANZA NOS PALO ALTO HUB HALF (B) PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

PLEASE READ: May fit other years and other models but it is the responsibility of the buyer to verify this before purchase as we cannot guarantee this.  Remember...Used parts have the usual minor scratches and wear. This may or may not be visible in the photos provided. Wear items such as bearings, bushings, light bulbs, brake pads, tires, etc.

YOU ARE BIDDING ON ONE BONANZA JACK SHAFT DRIVE CHAIN PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

' 1-844-232-9919 Combined Shipping / Lowest Prices FREE SHIPPING on all additional items! Proline 273001 DESPERADO 2.8 CHROME REAR WHEELS (2) TRAXXAS STYLE BEAD PRO273001             We sell Brand New, Factory Sealed items. All items included Warranty.

Airbox  Assembly 2 stroke 49cc JOG Minarelli chineseNew but I purchased it for a bike we never put it on

YOU ARE BIDDING ON ONE BONANZA THROTTLE TWIST GRIP PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA NOS SMALL JACK SHAFT SPROCKET PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA FRAME IS IN GOOOD SHAPE THERE IS SURFACE RUST AND BOTHE OF THE FOOT PEG BRACKETS ARE DAMAGED PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA SEAT PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

' 1-844-232-9919 Combined Shipping / Lowest Prices FREE SHIPPING on all additional items! Thunder Tiger PJ6312 Strut, Desperado TTRPJ6312             We sell Brand New, Factory Sealed items. All items included Warranty.

' 1-844-232-9919 Combined Shipping / Lowest Prices FREE SHIPPING on all additional items! Thunder Tiger PJ6296 Rudder Set, Outlaw, Desperado, Atlantic TTRPJ6296             We sell Brand New, Factory Sealed items. All items included Warranty.

CLICK FOR MORE!!! 1971 Bultaco Alpina 250 Motor Number: PM-8506329 Frame Number: PB-8506329 Most of these parts will fit other years. Please check with your local dealer or favorite website, Thank you! Motor Hardware are in Good shape, there are scratches, as seen in the photos.

YOU ARE BIDDING ON ONE YAMAHA YZ80 BUILT TO LOOK LIKE A MAICO 501 THIS ONE OF A KIND BIKE WAS BUIL BY JOHN HOMAN CO OWNER OF NORTHWEST MAICO / CZ IT HAS BEEN GARAGE KEPT AND IN GREAT SHAPE THIS IS A TRUE PIECE OF AHRMA VINTAGE MX RACING! YOU WILL NOT FIND ANOTHER ONE LIKE THIS! AS YOU CAN SEE HE PUT A LOT OF TIME AND CARE INTO IT, IT HAS AKRONT RIMS CHROME HUBS CUSTOM TANK AND EXHAUST!

This is a replacement Piston, Wrist Pin, Cir-clips and Ring Set for 50cc 2-stroke Minarelli 1E40QMB 1PE40QMB JOG engines. This Piston and Ring Set fits many makes and models including the TGB, Vento Triton, Vento Zip R3i, Yamaha and many others.   Measurements: Piston: 40mm Wrist Pin: 12mm Circlips: 2 Check out my other items! Be sure to add me to your favorites list! Sign up for my email newsletters by adding my eBay Store to your Favorites!

*IF YOU RECEIVE YOUR ITEMS WITH ANY PROBLEMS, PLEASE CONTACT US IMMEDIATELY TO RESOLVE THE ISSUE BEFORE LEAVING FEED BACK. OUR PARTS ARE 100% GUARANTEED. THANK YOU FOR YOUR BUSINESS!!! SCROLL DOWN FOR MORE PHOTOS!!!

This is a German Quality Xtra Power Performance HMK C7HIX Spark Plug for the  horizontal Honda Trail style engines, Honda, Kawasaki KLX and KSR  2 valve Heads on the 49/86/90/110/120/125/140/150/160/170, and Sachs Madass . This plug also fits the GY6 4-stroke 50, 125 & 150cc engines in many models including the Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP, and many others.  Many manuals recommend a gap of .5 -.6mm (0.22 -.24 inches).

Belt Cover Bolt Set, (10 bolts) Long Case, 4 Stroke, GY6 50 139QMB Engine.  Please read the Mechanics Note below to determine which one you need. Mechanics Note: These covers come in both short case and long case. The short case has 8 installation bolts and the long case has 9 or 10 bolts.

This is the Complete Key Set for the Vespa Hot Rod Classic style scooters (See picture above).  This switch kit includes the complete ignition key switch and seat lock kit and two keys.  Vespa Classic-style scooters  include the Lance Vintage, Roketa Capri, TNG Low Boy, Vento Hot Rod and many others. Check out my other items! Be sure to add me to your favorites list!

This is a quality replacement Starter Clutch Bendix (Overrunning Clutch) for the GY6, 4T, 139QMB, 50cc engine. Use this quality Bendix to help get that starter clutch to engage and turn the engine over. This Bendix fits Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others.

This Stator Flywheel Engine Cooling Fan is for the 4-stroke, GY6 50, 139QMB engine. It will replace faulty or broken fans and keep your engine running cool. You can find this cooling fan on many models such as Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP both the short case and long case motors.   Please add me to your favorites list! Please visit my eBay Store http://stores.ebay.com/fastchinaparts95!     Important note for  International buyers...shipments Import duties, taxes & charges are not included in the item price or shipping cost.  These charges are the buyers responsibilities.

This intake manifold fits all 4-stroke GY6 139QMB 50cc engines. This intake has a vacuum line nipple and is easy to install with a 2-bolt installation. Brands and models with this engine type include Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others .

Spark Plug, NGK BP7HS, Eton, Suzuki LT50, TGB, Vento Triton, Vento Zip R3i, Yamaha 1PE40QMB, Yamaha Razz and many others.. Specs: •Thread Size: 14mm  •Reach: 12.7mm (1/2 inch)  •Hex Size: 20.6mm (13/16 inch)  •Gap: 0.7mm (.028 inch)  •Heat Range: 7 Check out my other items! Be sure to add me to your favorites list!

This is a standard replacement belt for the GY6 125/150cc 152QMI 152QMJ 157QMI 157QMJ "long case" engine. . Note: Scooters with a long case usually have a 12" - 16" rear wheel.

6002-RS Bearing, Double Rubber Sealed, Deep Groove Ball Bearing, Self- lubricated, 15mm x 32mm x 9mm, wheel bearing and other uses, Equivalents: 6002-2RS1 & 6002-2RZ & S6002RS This Bearing fits GY6 based Baccio, Baja, Jonway, JMstar, Lifan, Malaguti Wussi, PGO Bugrider, PGO Bugxter, KYMCO, PGO, Roketa, Strada RX150, Sunl, SYM, Tank, TGB, TNG, Vento, Vento Phantom R4i 125cc, Verucci, VIP, Viva, Yamati and many others. Please add me to your favorites list! Please visit my eBay Store http://stores.ebay.com/fastchinaparts95!   See attached photo labeled "Deciphering Chinese Engines Codes" for clarification in determining your engine type.

Belt Cover, Left CVT Crankcase Cover, 1PE40QMB, Minarelli 1E40QMB 1PE40QMB, Overall length 16" , fits Vento Zip R3i and many more Check out my other items! Be sure to add me to your favorites list! Sign up for my email newsletters by adding my eBay Store to your Favorites!

Cylinder Head, Non-EGR, (47mm), GY6-80,  for the GY6 80cc Big Bore Kit, Good quality casting, machined to fit the larger combustion chambers.  This head has the standard size intake and exhaust valves. This cylinder head fits the 80cc kit on Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Tomos Nitro 50, Vento, VIP and many others.. Check out my other items!

This is the Rotor for the 8-pole stator on GY6 125/150cc engines. These rotors are available in either 6, 8 and 11-pole. These stator generators/rotors are found on Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others.

This is a Non-EGR, 52mm Big bore Cylinder Head Assembly with the head, valves, springs, studs, seals and seat, already installed for the 125cc upgrade kit.  This has the standard size intake and exhaust valves.  This head is the minimum required to do the 100cc upgrade to the GY6-50 engine.  This head fits the 125cc kit on Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Tomos Nitro 50, Vento, VIP and many others.. Check out my other items! Be sure to add me to your favorites list! Sign up for my email newsletters by adding my eBay Store to your Favorites!

These are High Quality 50mm Taiwanese Piston Rings for our GY6 100cc Big Bore Kits used in the GY6 50cc scooters, quads, ATVs, and buggies with Chinese engines. These fit many brands such as Jonway, JMstar, Roketa, Sunl, Tank, TGB, TNG, Vento, VIP and many more. Measurements: 2 Rings: .98mm 2 Rings: .41mm Oil Ring: 1.77mm Mechanics Note:These rings are better than the original and will last and perform better.

Belt Cover, Black,  (Long Case Type C), Left Crankcase Cover, measures 18.25 inches, GY6-50, 139QMB, (10 bolt) with 729 belt.   Please read the Mechanics Note below to determine which one you need. Mechanics Note: These covers come in both short case and long case.

 Belt Cover, Black, (Long Case), Left CVT Cover, GY6-125/150, QMI152/157 and QMJ152/157 engines. Overall length 19", fits Baja,  Boreem (BMS), Matrix 150, Roketa, SUNL, Tank, United Motors, Vento Check out my other items! Be sure to add me to your favorites list!

Wrist Pin Needle Bearing, 12mm, for the 1E40QMB 1PE40QMB 2 Stroke Minarelli JOG engine with the larger piston rod bearing like Vento Triton and other brands. Measurements: I/D: 12.27mm 11 Rollers O/D on the Bearings: 15.45mm O/D on the Frame End: 15.8mm Length: 12.69mm  Check out my other items and please be sure to add me to your favorites list! Sign up for my email newsletters by adding my eBay Store to your Favorites!

 This is a complete 57.4mm Non-EGR replacement Cylinder Head for the GY6-125/150cc 152QMI 152QMJ 157QMI 157QMJ engine.  This includes the head with fully installed seals, seats, springs, studs and moly coated valves.  The head bolts measure 54mm center to center, square. This head fits the Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Tomos Nitro 50, Vento, VIP and many others.. Check out my other items!

This is a Complete OEM replacement Engine Gasket Set for the stock Long Case (10 bolt belt cover) 39mm 4 stroke GY6 50cc, 139QMB engine. This complete gasket set fits the Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others. See attached photo labeled "Deciphering Chinese Engines Codes" for clarification in determining your engine type.

This is a 6-pin AC Racing Performance CDI with an Unrestricted Rev Limit and an advanced timing curve for the GY6 50cc 125cc and 150cc engines. Engine applications include the 139QMB, 152QMI, 152QMJ, 157QMI, and 157QMJ.  These CDI's have no governor and eliminate that irritating rev-limiter which might be keeping your engine speed restricted. See attached photo labeled "Deciphering Chinese Engines Codes" for clarification in determining your engine type.    This CDI is similar to our orange performance CDI but has a more aggressive ignition advance curve.

This is a High Quality Gates PowerLink Belt for the GY6 50cc 139QMB long case engine. This belt fits Baja, JMstar, Jonway, KYMCO Agility 50, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others. Note: Scooters with a long case usually have a 12" - 16" rear wheel.

This is a quality Cylinder Top End Rebuild Kit for the Left Side on a Yamaha XV250 2V49FMM engine. This excellent kit includes the Cir-clips, Cylinder, Base Cylinder Gasket, Head Gasket, 49mm Piston, Rings, and 13mm Wrist Pin. This Cylinder Rebuild Kit fits the Diamo Cruiser 250, Keeway Cruiser 250, Keeway Dorado 250, Keeway Supershadow 250, Kingring JL250V, Lifan LF250V, Roketa Vado 250, Vento Colt 250, Vento V-thunder 250, Yamaha XV250 and many others....

This is a very common regulator rectifier for Chinese made vehicles. It has a 4-prong rectangular connector for the GY6 and Honda Trail style Horizontal engines. This regulator is for the 4 stroke Chinese engines.

This is a quality 18mm CV replacement Carburetor for all GY6 4-stroke 139QMB 49/50cc Chinese engines. This is better than stock and comes with a larger venturi, and quality construction. This carburetor is used on Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others. Mechanic Note: This better than stock carburetor comes with an accelerator pump, which will frequently eliminate hesitation when you open her up.

This is the OEM replacement belt for the GY6 50cc 139QMB 4-stroke long case engine for Chinese scooters, ATV's & Go-karts.  Scooters with a long case usually have a 12" - 16" rear wheel.  See attached photo labeled "Deciphering Chinese Engines Codes" for clarification in determining your engine type.   These are used on Baja, JMstar, Jonway, KYMCO Agility 50, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others. Check out my other items and be sure to add me to your favorites list!

This is a ready to install OEM complete Clutch Assembly for the 4 stroke GY6 150cc 157QMJ Chinese scooter, moped, ATV and go-kart engines Clutch Pulley Sheaves Housing Assembly  Clutch Springs Torque Spring This clutch fits Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others..  Be sure to add me to your favorites list! Please visit my eBay Store http://stores.ebay.com/fastchinaparts95!