Chopper Chopper Motorcycles, page #25

              2000 Panzer Digger Custom Chopper Panhead Motor Rare                           I am pleased to offer this very unique Panzer Digger custom chopper.  MODERN TECHNOLOGY meets HISTORIC DESIGN.  The look of this chopper is unmistakable.

Beautiful custom chopper style bike S.T.D. 74" Pan head / generator style engine S&S "E" series carburetor dual plug heads Andrews "B" cam solid lifters New Vulcan dual fire electronic ignition New Battery Fresh rebuild on top-end four (4) speed jockey style transmission W/ new seals Three (3)" open belt drive 230 tire on rear / 80 spoke wheel 21"Avon Venom tire on front Rev-tech four (4)" stretch frame

Beautiful 2003 Chopper style bike S.T.D. 74" Panhead /Generator style engine S&S "E" series Carburetor Andrews "B" grind cam Dual plug heads fresh rebuild on top-end New Vulcan dual fire ignition system Four (4) speed transmission W/ new seals Jockey shift W/ custom shifter three (3)" open belt drive Rev-tech four (4)" stretch frame Avon 21" venom on front 230 W/ 80 spoke wheel on rear New Battery Kick only start Easy starting Fast Running bike

This beautiful Custom Soft tail was built by Steel Thunder Custom Cycles for a museum in SarostaFlorida where the chopper spent 5 years. It has a El Bruto 113Ci, 120Hp Ultima Performance engine with a SS Super G carb and Fireball Ignition. The bike is completed with Dakota Digital Badlands electronis.

Redneck rocket frame, 8ft long, raked forks, dyna tree, chubby lean back internal wired bars, custon coffin tank, flush chrome gas cap, shovelhead forward controls, flame shift linkage, custom print primary & timing covers, custom skull grips, levers, cylinder, bolt covers, seat, sissy bar, brake light., no speedometer, no odometer, no mirror, no signal, no professional paint. True rat bike. Torpedo lamp, talon kick stand, la rosa shedron seat/pillion/heatshield/spare bottle, custom twisted 36" sissy bar, red LED, shark audio speakers, lithium deltran battery, s&s carb, cone air cleaner, leather tool bag, titan battle axe front wheel 19", braided steel feul line, PayPal fee of 3.5% added to deposit in addition to price of bike, buyer responsible for shipping Arrangements and payment if necessary.

2012 chopper reworked in early 2016 powder coated frame, wheels, new paint on fender and gas tank. New tires front and rear avon venoms all new controls revtek 100hp 100 cubic inch motor matching 6 sp trans, 3" bdl open primary. Lots of custom touches front to rear very clean build looks and runs great. 

2009 Custom Chopper with a Ultima frame, Ultima 113 engine, Ultima 6 speed tranny, bullet aluminum wheels (5k for just the wheels + power coat), forward controls, air suspension, 250 rear tire that is new with zero miles on the tire, decompression heads, and I have almost every receipt for it with part numbers.  This was very well built and rides like a dream with the air ride.  Don't have time for it.

This Chopper is a project to be finish, I was living in Cancun I'am back home to Boston .. sold as is, paint art work $2,500 plus plus overall around 20,000 USD in it must go.. I went over my head I have no time to finish the project..

Harley evo chopper 1991 fxstc Motor  86 santee frame  this is the current state of it with the differant handlebars      Please email me for details  because it does need some  stuff but runs and drives well ;it needs electronics  meaning lights.                 

Used Motorcycle Store 1903 IL Route 120, Mchenry, IL 60051 2235 South Eastwood Drive, Woodstock, IL 60098 EBizAutos  2004 EDDIE TROTTA THUNDERCYCLE DROP SEAT CHOPPER THUNDERCYCLE CHOPPER 2004 EDDIE TROTTA THUNDERCYCLE DROP SEAT CHOPPER 98ci REVTECH V-TWIN 1605cc PHOTOS PHOTOS VIDEOS VIDEOS REQUEST MORE INFO VIN: 1T9HW200X4F734008 Stock #: EDDIETROTTA Condition: Used Clear Title Engine: 98ci REVTECH V-TWIN 1605cc Exterior Color: Green PHOTO VIEWER VIEW OTHER AUCTIONS EMAIL A FRIEND MORE DETAILS Vehicle Overview 2004 EDDIE TROTTA THUNDERCYCLE DROP SEAT CHOPPER CUSTOM PAINTED GREEN FEATURES AND ACCESSORIES: 98ci REVTECH V-TWIN 1605cc  CUSTOM EXHAUST  VELOCITY STACK INTAKE WITH MIKUNI CARB  21 INCH FRONT WHEEL  240 REAR TIRE  STINGRAY SEAT  3 INCH OPEN PRIMARY BELT DRIVE  INVERTED FORKS  BREAKSTER REAR CALIPER AND ROTOR COMBO WITH PULLEY ORIGINAL $75,000.00 FRENCHED RIGID FRAME CUSTOM BUILT CHOPPER BY EDDIE TROTTA  888-933-7674 Used Motorcycle Store 888-933-7674 - We sell motorcycles, arrange motorcycle financing, perform world class motorcycle service, accept trade-in vehicles, purchase vehicles outright, and have arranged delivery for hundreds of vehicles all over the world. We offer motorcycle rentals and arrange fantastic motorcycle tours from both locations during the riding season. Our showroom is open Monday - Thursday 10:00A.M.

Custom HD 88. 2002, 28000 miles. 15K OBO.

WCC 4" up 2" out Powder Coated Black Frame W/Neck Badge and Axle Covers7 Degree Billet Trees6" over Fork Tubes w/Black Powder Coated LegsWCC Oil Tank with battery MountWCC Sporty Gas Tank with Billet Cap and Pingle PetcockWCC Rear Fender with Internal Struts and Frame BungsWCC 8" Handlebar Risers with Six Shooter Jesse James 44 Mag BulletsWCC Six Shooter Jesse James 44 Mag Oil CapWCC Spade Air Cleaner and Choke KnobSpeed Dealer Billet MirrorSpeed Dealer Knurled PegsPerformance Machine Black Billet Hand ControlsPerformance Machine Black Powder Coated 4 Piston CalipersPerformance Machine RotorsSitwell Billet Black ThrottleBlue Anodized Alloy Rims with Black Anodized HubsNew Custom Seat ( Very Comfortable!)100" Revtech Motor with Big Cam and Compression Releases InstalledS&S Super G Carb5 Speed Revtech Transmission with Enclosed Primary3000 Miles New!Clean California Title This Revtech motor was torn down when new and the heads were rebuilt using updated parts and the bigger cam.  The comp valves were installed at that time.   Starts easily.

Registered as 1999 Paughco. Paughco frame with 40 deg. rake.

This is a project bike that has been ongoing since about 2006.  I am selling this bike for a friend in the Military who, due to operational considerations, no longer has the time to finish it nor the ability to sell it himself.  He is a super fan of a certain college ...

This BIKE IS SICK!!! It was built by Central Florida Choppers. It is a "one off" custom bike that is stretched almost 10'!!

2004 IRONHORSE CUSTOM CHOPPER/PROSTREET124 S&S MOTOR CUSTOM AMAZING PAINT HAND TOOLED SEATCHAIN DRIVE OPEN PRIMARY SOFT TAIL AIR RIDEREAL HEAD TURNER

2006 Chopper Green with a Motor is a 127cu. ULTIMA and 6 speed ULTIMA trans. Maybe 5000 miles on the bike, New paint Bike was built off a 2006 Frame and Titled as a 2006 U-Build.

This bike was custom built with a Indian theme in mind. It has a Patrick Billet engine, Baker 6 spd, reverse tube front end, spoke wheels. Very much a one of a kind bike.

I bought tail lights blinkers, mirrors with bone hands as the turn signals , headlight switch/ left, right turn, horn button. an then was going to mount battery behind motor. it would need to be charged now and again.

2007 Custom Chopper https://www.youtube.com/watch?v=richwKpJ-ok  Black Paint with Skull graphics and Ghost Flames  Frame is single downtube 250 frame with 8" overstock up  12" over 65mm front forks  Motor is a 80"(1340cc)Harley motor top end rebuilt  10.1 pistons, Head work, EV46 Cam, S&S polished carb  Custom air cleaner, Crane single fire with dual Dyna Coils  Bastini pro pipes. 3" open Belt Drive Polished, 6 Speed polished Trans  Custom front fender Modified with Big Dog struts, Jesse James Villain Tank Modified  Dakota Digital Speedo, Ness hand Controls,  Sturgis Billet Wheels 250 tire  Exile rear brake Sprotor and internal throttle.  Choppers Inc Scalloped Grips and Side mount tail light.

True Survivor built in the 70's been in storage over 30 years. Runs and rides good. Lacquer paint shows it's age with cracking chrome has some pitting and flaking here and there.

2013 REDNECK ENGINEERING GETTING HIGH CHOPPER*** WHEELS NOT INCLUDED ***CLEAN FLORIDA TITLE REGISTERED AS AS REDNECK ENGINEERING NOT ASPTHD 80CI 1340cc MOTOR 6 SPEEED TRANNY 3" BDL OPEN PRIMARY GANDUER AUTO CLUTCH PM CONTOUR BLACK CLUTCH & BRAKE MASTERCYLINDERS & GRIPS , PM CONTOUR BLACK FWD CONTROLS PAUL YAFFEE CUSTOM XPIPES JESSE JAMES VILAN TANK ETC . . .

Custom built rigid rolling chassis, Paughco frame, CCW girder, American mags (magnesium) front and rear machined for tapered Timken bearings. One off parts are license plate/ tail light bracket, sissy bar, seat. Gas tank is a customized peanut and has been boiled out and resealed.

GREAT LOOKING SOFTAIL BASED CHOPPER .  BIGGER S & S SUPER STOCK ENGINE WITH S& S CARBURETOR AND 5 SPD.. BIKE STARTS AND RUNS GREAT ..  ALL OF THE GEARS WORK BUT DOES NEED BRAKES FIXED.. FRONT ONES DO NOT WORK..  REAR ONES BARELY WORK..

For Sale Show winning, custom built-West Coast Chopper CFL kit bike, built in 2002 by Power Stroke Cycles in the Laconia, NH area. This bike is all top quality, full of muscle and is extremely reliable. It has an S&S 113" power-plant & custom 5-speed transmission, both built by me, who has been an H-D performance specialist for 30 years.

50 cc custom min chopper in very nice shape. runs@ shifts good.Its a soft tail just like the big one . do not know the year .NO SHIPPING

Bike is titled as 2005, but was completed in 2015. Bike has approx. 1300 miles.

This is a 2003 vangeance,as you can see in the picture it has a ton of chrome on it.frame is powder coated,18" rims front and back,brembo brakes front and rear,has accutronix master cylinder,120/90/18 front tire,rear is a 250/40R/18 duel disc brake front and rear.only 129 of them was build and only one has this paint job.digital cluster.you can added back seat and foot peg.if you have any other question you can contact me.the engine is a 113 ss evo.i have had it up to 115mph in 3rd,it has a five speed tran.

 2005 Bad Island Toyz full custom chopper with less than 6 original miles. Built by Wayne Barreto. Engenuity 120 c.i.

Bike is in great condition but has a few small scratches or blemishes.  Run fantastic and ride pretty comfortable concidering style of bike.  Buyer is responsible for pick up or shipping arrangements.

2002 Panzer Big Red Machine Very Rare and Very Clean 113" S&S 6 Speed Dakota Digital Gauges GMI Racing Controls Amazing condition. ALL 110% ORIGINAL - Lots of History behind these and this is #13 of only 14 or 15 ever made. Have original owners manual, Magazine features, etc.

2003 Custom Chopper100" RevTech Engine6spd250 rear tireNice bike 6500milesI reserve the right to end auction as the bike is for sale locallyBuyer is responsible for shipping but will crate it up for freeFree local pick up937-379-1969D&S Auto

 NO RESERVE!! 2011 HARDTAIL CHOPPER! EVO MOTOR!

Motorcycle from a private collection. Completely handmade. Participant and winner of many exhibitions, bike fests and competitions. The original – ural 1968.

2003 CUSTOM BUILT MOTORCYCLE CHOPPER EXCELLENT CONDITION! LIKE NEW! HARDLY RIDDEN!

This is a custom built Triumph chopper built around a 69 Bonneville motor.  It was featured in the August 2005 issue of "The Horse Back Street Choppers" magazine.  See pics for the 3 page write up detailing the build.  It has not been tagged since 2008-09.  It was built as a show bike with only 6 miles on the clock.  It has been under a sheet in the shop for the past 7 years.  Time to move it on to someone else.

Up for sale is a 2015 special construction.  21" front wheel, inverted front end , custom frame, custom tanks, 113 " motor polished, 6 speed tranny, open belt drive, rigid, 300 rear tire, black paint w/ art work.  Any questions feel free to email me @ Nickellscustoms@comcast.net.You can also reach me at my cell phone at (209) 323-0090. 

This bike was built by a senior design engineer that worked with Jesse on Monster Garage. I was told that Jesse helped him build it, but I don't have anything to back that up. The bike was tuned by Kendall Johnson in North Carolina.

Killa Bee 2005 CUSTOM CHOPPER LESS THAN 500 MILES -  IRONHORSE TRAILER INCLUDED -  LOW RESERVE  The “Stinger Bike” Project Featured in HOT BIKE Magazine February 2006 If you have ever been wanting a custom “one off” chopper but could never find the “right one” your search may be over. Once you view the details and history of this chopper and the special features along with the 2013 Ironhorse (2 Bike 1 Trike) model Trailer that is INCLUDED with this listing you may say THIS IS THE ONE ! Yes, the trailer mentioned above will be included if the LOW RESERVE is met.

-VIN NO. 1CFLR050001137 -124 S&S ENGINE. -PM BRAKES.

Used 2006 Big Dog K9 for sale with only 2,699 miles! Check this one out! S&S 117 cubic inch motor, Baker 6 speed transmission, 300 rear tire, Vance & Hines Turn Down exhaust, polished wheels, polished controls, Custom Cone air filter and more!

2005 Bourget Fat Daddy Beach Cruiser 300 for sale!! Check this out! Top of the line, one of a kind.

Used Big Dog Chopper for sale, only $11,999! Sharp 2004 used Big Dog Ridgeback chopper with 107 cubic inch S&S Super Sidewinder motor, 6 speed transmission, 21 inch chrome front wheel, super fat 250 mm rear tire, custom license plate mount and chrome everywhere! Sold for over $26,000 new, this Big Dog is a steal at only $11,999!

Custom Chopper Fire Fighter Edition. This one is a must see! Pictures and videos do this chopper no justice.

2005 Bourget Fat Daddy Beach Cruiser 300 for sale!! Check this out! Top of the line, one of a kind.

Used Big Dog Pitbull for sale only $10,999! SUPER SHARP! Only 8,615 miles!

Used Big Dog Chopper for sale, only $11,999! Sharp 2004 used Big Dog Ridgeback chopper with 107 cubic inch S&S Super Sidewinder motor, 6 speed transmission, 21 inch chrome front wheel, super fat 250 mm rear tire, custom license plate mount and chrome everywhere! Sold for over $26,000 new, this Big Dog is a steal at only $11,999!

Custom Built Killer Choppers S&s Chopper on 2040-motos Can I buy that Frame?