Chopper Chopper Motorcycles, page #21

Chopper Built by Count's Kustoms out of Las Vegas (as seen on History Channel "Counting Cars") This Chopper is the real deal!!! It was built for Keith Urban and was in the 'Days Go By' video which features Keith riding the bike in Australia.   357 Chopper - Silver Customs Tribal Chopper with Keith Urban painted on rear fender     I had the tank repainted by Count's Kustoms (added more Tribal pattern) ________________________________________________________________________________________________________________________ Engine: Revtech Transmission: 6 Speed/Polished Primary: Primo Brute 1V3: open Final Drive: Chain Frame: RC Comp Rigid Rake: 42 degrees Stretch: 5" Stretch - 6" Up-Molded Front Suspension: Sugar Bear Springer 18" Over Brakes & Calipers: R.C. Comp Wheels: R.

bike runs great some minor cosmetic blemishes

Titled 2005 custom chopper  Jolly roger frame, stretched and raked  Mean street front end Rc front and back wheels Metzler 300 rear tire diamond cut show polished 120 ci Evo v-twin engine  PM everything (master cylinder, slave, clutch, brake, tranny brake, controls) House of Kolor Photochemical paint (changes color depending on if its been sitting in the sun(Orangish) or shade (reddish) or night (copper) custom built tank, seat and rear fender 300 big boar battery, shorty super G Carb Custom 2 to 1 same length pipe Exhaust PM primary  Many extras No joy rides, this bike is very fast and almost 10ft in length.  I will be happy to ride it down the road or cruise it down the interstate next to you. This was a bar hopper for me with less than 2000 miles.

SouthFloridaCycleSales Store Custom Harley Board Track Racer Boardtracker Chopper Bobber 23" WHEEL You are bidding on a 2013 custom Board Track Racer.  It is a one of a kind chopper that will surely stand out from the croud where ever you go. Priced To Sell!! You wont find a cooler custom bike on Ebay with a lower price guaranteed.

This is one of the coolest,cleanest and simplest bare-bones  hand built chopper/bobber special construction bikes around built with the Harley-Davidson evolution 80 inch motor and vintage Davidson four-speed Kicker transmission. the frame is aftermarket, custom front end, first off I'd like to tell you little bit about the guy who built the bike, his name is Justin and he is a trained manual machinist who has worked in he aerospace industry building rockets, satellites, and stuff he can't even tell you about. He built this bike for himself, all the billet aluminum pieces that you see, he made!!!!

2004 Pro One Barfly Chopper 2000 miles. Have 41k in receipts and all build paperwork. 250 Rear tire, 5 inch Backbone Stretch,6 inch Downtube Stretch,40 degeree Rake, 1 1/2 inch frame tubing with duel downtube, 5 3/4 inch headlight, chrome shocks, strutless rear fender, 2.15x21 Billet front wheel,2.15x8.5 rear wheel, matching rotors, brakes and pulley.

Drive Train is a 1979 Suzuki GS1000Frame Tag says "1969"This machine is Turn KeyMany one off parts on this SurvivorNew Battery & Rear ChainI Ride This EverydayDon't know mileage on motor - no smoke-no noise-no issuesCall Tony @201-841-9795 with any questionsthe rear view mirrors/blinkers are not on the bike..but the wiring is still there also a dyna electronic ignition

For Sale is 2013 custom built chopper.  Built with the following parts:  RC Components rolling chassis and wheels, American Suspension inverted front end, Revtech 100 cubic inch motor and 5 speed trans, RC Component brakes, PM forward controls and handlebar controls, 250 rear tire softail, Vance and Hines Big Radius exhaust,  Dyna 2000 reprogrammable digital ignition system. I built the bike over a few years and actually completed it and titled it this year. Bike has been ridden and has normal wear/chips in paint etc.

LIKE NEW..LESS THAN 2000 MILES. KEPT IN A/C. PURCHASED 4 YEARS AGO FOR $48,000.

 2005 Custom Chopper Hard Tail with a 113 ci Ultima engine with S&S Heads Backed with a Ultima 6 Sp Trans, 9.5 feet long front end by American Suspension, Paint by Hasons Custom Paint in Ar. Custom seat to match paint scheme  

This is my personal  ride and I built it when I started my shop to show what I could do. I really don't want to sell it but need the money to move on to other projects and help to move my shop to the next level. This bike runs perfect and is very fast.

This bike is a Paughco Swedish Style Frame Up 4" and out 2".  The wheels are PM Wrath wheels and matching rotors using Brembo Calipers on front and rear.  The engine and transmission are Harley Davidson Evolution and 5-Speed with a Bearing support and a 3" Belt drive tying them together.

  Frame by Chassis Design,  drop seat with a 40 degree rake. Motor is an 96 S&S with ultima 6 speed tranny…DNA Springer front end, Z bars and speedo and 280 avon rear tire. Excile sprotor rear braking system, P&M front brake  

                                                                                                                                                                      

NEED GIFT IDEAS??? CHECK OUT OUR STORE, WE HAVE TON'S OF NEW AND USED PARTS AND ACCESSORIES!  Be sure to add me to your favorites list!  AND Check out my other items!   2001 Ultra Sledgehammer custom chopper.

Used Big Dog Chopper for sale, only $11,999! Sharp 2004 used Big Dog Ridgeback chopper with 107 cubic inch S&S Super Sidewinder motor, 6 speed transmission, 21 inch chrome front wheel, super fat 250 mm rear tire, custom license plate mount and chrome everywhere! Sold for over $26,000 new, this Big Dog is a steal at only $11,999!

2005 Bourget Fat Daddy Beach Cruiser 300 for sale!! Check this out! Top of the line, one of a kind.

Custom Chopper Fire Fighter Edition. This one is a must see! Pictures and videos do this chopper no justice.

2005 Bourget Fat Daddy Beach Cruiser 300 for sale!! Check this out! Top of the line, one of a kind.

 First and foremost I do not want to sell my dream bike!! However, I had recently a life threatening blood clot in my left leg and Im no longer medically allowed to ride. So before you ask me why Im selling it....theres your answer- LOL The motor is an Ultima El Bruto 100" engine which runs perfect.

2008 Thunder Mountain Keystone Chopper Tax issues forcing me to liquidate some of my toys. Time to pay the Tax man. My loss is your gain.

This show winning custom built motorcycle has a 2001 Pro-one custom molded frame, but was actually registered in 2004 with only approx. 2200 miles. This motorcycle was built with many high quality parts including: S&S 113 fully polished motor Jims 6 speed transmission w/ 29 tooth drive pulley Jesse James fenders Custom made Independent gas tank Performance Machine wheels, rotors, pullys, grips, hand controls, foot controls, calipers, mirrors Paul Yaffe side mount tag frame with brake light Avon tires (21 front and 18x180 rear) Pro-One front end Headwinds headlight Custom Danny Gray seat BDL Belt drive Legends Air Ride rear suspension Handmade custom billet Air ride gauge, ignition mount, speedometer mount, fender spacers Custom one off handlebars Dakota digital speedometer with tachometer and oil pressure Thunder Header Comufire Ignition Custom painted with Spies Hecker Paint   Bike has some chrome pitting on front lower legs, headlight, and wheels, but looks and runs great (fast)!

I built this bike myself in 2006 it is based on the harley soft tail design . its has a 1340 evo motor that was completely rebuilt and the motor is a 1986 motor. rear tire is a 250 mil wide.pro one billet wheels ,6 speed trans,digital speedo.I put over 17000.00 $ dollars into this bike .the bike has 43 degrees of rake.

2006 Custom Chopper purchased at Daytona Bike Week. 102ci Screaming Eagle.Eagle Primary.Rigid frame.  Had it repainted two years ago with Electric Blue paint code, same code Dodge uses to paint the Vipers. New tires, brakes, and custom seat with passenger pegs. Short pipes, very loud.

This is a close to mint condition (not mint because of one chip on front fender) 2003 Hell Bound Steel Six Up Custom Chopper. 122 S&S motor, 6 speed overdrive trans,  2,300 miles, lots of chrome, air ride suspension. Rear tire is size K 250 40 18 I am the second owner and have owned it since April, 2006 and have barely put 300 miles on it!!

Custom motorcycle built by Swift for Daytona bike week bike show. One of a kind custom paint work. Assembled with top of the line Harley-Davidson hard parts.

This bike is a Custom Mike Powers Chopper, in great running condition, lots of power, 6 speed, with dual carburetors, 280 rear tire, which the tires are new, custom live flames paint job that looks great, garage kept, no mechanical problem, i am the 2nd owner, purchased this monster from a Dallas Cowboy Player, can't name drop....

Awesome 2008 V8 Chopper.  Looks and sounds GREAT. Only has 2400 miles.  Built in the USA...Miami Oklahoma.  Open Title.  Selling due to health reasons.  Updated on calipers, brake discs.  Extra under frame exhaust included.  Also has passenger seat, foot pegs and Back rest.  Service manual included.  Please call 931.232.6555 with questions. Price had been reduced.

  You are bidding on a 2002 Bourget Low Blow Custom Chopper. Gorgeous Bike with LOW MILES.... (2,408)                    Features:                                  117 c.i.

BEAUTIFUL SILVER WITH SHADED FLAMES. 2007 SAXON SCEPTRE PRO STREET STYLE CHOPPER. S & S SUPER STOCK 1573CC VTWIN WITH 6 SPEED TRANSMISSION AND RT HAND DRIVE.

Built for show......beautiful bike....tracks very well...better than original...clear title

Beautiful 2004 Swift Chopper, fully registerable and insureable. 113 cubic inch, Very low milage, Runs great, Buyer to pick up or pay for shipping. Cash, money order or cashiers check only.

I'M A PRIVATE PARTY SELLING MY 2004 CUSTOM BUILT SOFTTAIL CHOPPER. 2500 ACTUAL MILES. OLD SCHOOL STYLE WITH 16 OVER SPRINGER FRONT END WITH 4 INCH RISER Z BAR.

Sexy Motorcycle!!! 2005 bourget 330 python custom made first owner bike normally on display in my living room.  Bike has custom air cleaner, bike has custom spikes thru out the bike. Bike has been in many shows and won many awards.Bike is a great bar hopping.  Be assure when on the bike every girl will want you and every guy wants to be you.

Pretty cool HD shovelhead chopper/bar hopper up for sale here. I have had this bike for about 6 years and used it for shorter rides, cruising around town, and took it to a couple rallies here is Texas. I really love this bike and it has a really cool look to it and it gets a hell of a lot of compliments and is fun really to ride.

2004 KC Creations Big Inch Bike softail single curved down tube frame, 8 inch stretch in the down tube, 4 inch stretch in the back bone with 40 degree rake. Perse Performance 16+ front end with 5 degree triple trees and hex shape lower covers. Total Performance 124 cubic inch show polish V-twin.

Height from ground to seat-24" from ground to top of handlebars 48" length-116'" This motorcycle was built by Custom Cycle Creations located in Encinitas, CA. 2007 Moto Expo San Diego Best In Class Winner for EVO Hardtail Custom " Radical� class Bike has about 1500 miles on it. Kamen Blue Metal Flake with Lime Time Green pearl flames.

2007 Custom Pro Street Chopper Rigid Chopper has all big tube framing, 300 back tire, 6 speed transmission, & Harley Davidson crate motor. One owner since new.  Mileage is approximate as there is no odometer.  Mileage is approximately 2,500 miles.  Will be glad to answer any & all questions.  I do have a shipper available.  Please email me with your location & I will provide a shipping quote if needed.  If you are close & want to inspect prior to purchase, we can arrange that, but very serious inquires only. $2,000 deposit due within 48 hours of end of auction via PayPal or cash if in person.  Full payment is due within 7 days of auction end via Cashiers Check drawn on national bank that I can verify or cash if in person.  Motorcycle and title will not be shipped until payment fully clears. 

  2007 ASPT (assembled from parts) BOBBER Multiple Show Winner (40+/- local trophies)   I'm selling this bike because I was in a near-fatal accident on my other bike over a year and a half ago and I can't ride any longer. It was maintained meticulously and never abused. If not for the accident, it would not be for sale.

this a new 2012 straightup chopper frame 250 wide tire with a 33' rake with a dna wide springer front end with a 21' tire rear 16' 250 tire engine is a fuel injection 1450 harley davidson with 2;600 miles i have all the complete wiring harness with module custom round  oil tank with brackets have complete gas tank with fuel pump an brackets custom 1"belt pully with matching 11".5 rotors also have shock that goes on springer front have two sets of handlebars 30"broomsticks an13"mimi apes have certifcate for frame this will make a bad;bad bike no paypal only cash when bike is pickup have right to end auction earley thanks for looking have any quistion email me or call 606 910 2304 . every part is new but the low mileage eng an trans.

2006 CUSTOM PRO STREET BIG BEAR SLED CHOPPER,THE BIKE HAS MANY UPGRADES,A REAL HEAD TURNER.BIKE HAS BEEN IN V TWIN MAGAZINE CENTERFOLD,MAGAZINE COME WITH BIKE. THIS TROPHY WINNING BIKE HAS WON MANY EVENTS.LOTS OF CUSTOM PARTS.BIKE IS IN CLEAN CONDITION,RUNS GREAT.I WILLHELP IN ARRANGE SHIPPING IN ANY WAY OR PICK UP .

Used 2006 Big Dog K9 for sale with only 2,699 miles! Check this one out! S&S 117 cubic inch motor, Baker 6 speed transmission, 300 rear tire, Vance & Hines Turn Down exhaust, polished wheels, polished controls, Custom Cone air filter and more!

68 ironhead chopper I bought this bike few months ago I put a new starter an genarator an a new battery in it changed the oil an trans oil fired it up it ran good an rode good bike comes with over 3000 in recipets but the battery went dead after a few hours after I parked it so it has a elec issue it has a short somewhere? It has like new tires paint has normal where an year an seat has couple small bad spots It is a nice true surviver lots I've power super b carb comes with a new kit for it an will have a new battery in a unopened box bike has tons of after market upgrades Clean number matching H-D titleIt is currently not running due to elec problem 

This is a 2007 Custom Pro Street. It has a Carolina Custom frame with a redneck eng. springer front end. No expense was spared.

 2005 Von Dutch Cruelworld Softail Chopper, under 3,000 miles Motor Patrick Racing Billet Show Polished Motor 113 cu.in. w/ compression reliefs, round barrels, dynamically balanced and emission approved HP @ Rear 124 BHP Bore x Stroke 4" X 4.50" Exhaust Joker / wrapped with heat tape Induction 42mm Polished Mikuni HSR Induction Cover Polished Billet Velocity Stack w/ Von Dutch Kustom Billet Tiki Breathers Primary Drive Open 3" Belt Drive Primo Rivera Clutch Primo Rivera Transmission Primo Rivera, Right Side 6 spd. Chrome Final Drive 1.5" Gates Belt 130T Front 21" x 2.250 " Rear 18" x 8.5 " Tires Metzler tire Front 90/90mm x 21" Rear 240mm x 18" Front Suspension Denvers Choppers Springer customized by Von Dutch Powder Matched Rear Suspension Softail Progressive Chrome Frame Diamond Chassis Stretch 7 " down tube / 4 " backbone Rake 42 degrees Trail 3.5 Swingarm Standard type A Coated Seat Height 22 inches Seat Finish Carved leather w/ exotic finish Seat Dampening Internal Gel & Chrome 3" Springs Dry Weight 542 lbs.

you are bidding on a 2006 Big Bear Chopper with low mileage this bike has been well taken care of and is a head turner whoever you go runs great all chrome in good condition excellent tires 100CC S&S motor this bike will make any owner proud

124cid S&S polished Engine6-speed Baker TransmissionSTD 180 Frame (180mm rear tire)West Coast Choppers Tank, FendersCustom Paint w/ ghost flamesWCC Iron Cross WheelsOpen PrimaryCustom Exhaust I am moving and need to sell as soon as possible. Please only serious inquiries and if you have any questions, please do not hesitate to send me a message and I will get right back to you. No serious offer refused. 

information@RKMotorsCharlotte.com 5527 Lakeview Road, Charlotte, NC, 28269, US 2005 Custom Chopper Custom Built Chopper 114ci V-Twin 6 Speed "Money" Year: 2005 Type of vehicle title: Clear Primary color: Green Mileage: 3000 Transmission type: 6 Speed Manual Engine: 114ci V-Twin Interior color: Black Vehicle info Biker Build-Off went off the air in 2007, West Coast Choppers shut down in October 2010, and American Chopper is more focused on family drama than bikes. Does that mean the chopper scene is dead? Of course not.

Custom Pro-Street with less than 3,000 miles.  Bike is geared for short distance speed - a hot rod for stop light to stop light excitement.  Powered by a bored and stroked 92 cu in Harley Evo engine (around 95 hp), 4 speed tranny, S&S Super G carb.  Beautiful House of Kolor red prism paint.  180 rear tire, Dakota digital speedo.  Titled as 1989 as the engine builder used engine cases from a 1989 softtail but bike was built with all new parts in 2005.  You can see from the pictures this is NOT a 1989 bike.  This is my favorite bike because it is fast and it gets noticed but I have 3 bikes and I am building another one so I need the garage space.  This bike was rarely ridden and has not been ridden in over a year and a half.  New battery and gas and it fired right up!  This is your chance to own a like new head turning custom that looks like a $30,000 bike for under $6,000. $500 deposit due at close of auction, balance due in 7 days in the form of cash, cashiers check, money order or bank transfer.  No personal checks.  Buyer is responsible for pick up or shipping.  I will work with shipper in anyway possible. Contact Terry with any questions or for additional pictures.

The motorcycle is an Original Arlen Ness hand built and hand painted by Arlen Ness.Had it in 2004 at Sturges  ( he doesn 't make many complete bikes ) signed  by Arlen Ness.Originally Sold for $ 45.000.00The bike as a 2004 built as the Y2K frame with rubber mounts. 2036 CC  T/P Pro Series Custom Engineering a large Monster with 122 Hp and 130 ft of TORQUE.Chrome every ware/ 220 rear wheel 6 speed Roadmax trans all this and still under 3000 miles Coolest bike for the least amount of money out there.No Trades Nick (772) 236- 9680

Custom Chopper made by Blackstone Custom Motorcycles, Duluth, MN. Paughco FramePaughco Springer Front EndHarley Motor, 80 cubic inch, 1340ccHarley TransmissionSamson Outlaw PipesHarley Rims & TiresCigarette LighterArlen Ness Side Mirror (Left Side)Many more custom parts, see pictures

TP Engineering 114 CI SHOW POLISHED Engine. Eddie Trotta velocity stack. Jims 5 speed transmission.

Hello! For sale is a 1973 molded frame "digger" style chopper. Fresh 836 engine all possible original parts or period correct.

Up for sale is my custom pro street chopper.  This bike is a head turner no matter where you go.  I have taken to Daytona and Myrtle Beach bike weeks.

This bike is very rare. This Ness model is the best handling of all the Arlen Ness bikes produced. The Speedliner has perfect stance and configuration and way ahead of its time with regard to the front end.

Real head-turner "Boxx Bike", original cost $100,000. One of a kind custom built by Paul Sr. and Paul Jr.  131 cubic inch H & L diamond cut, high compression (10:1, 4.5" Corvette pistons) evolution motor.  Approximately 3,000 original miles.

Too much to list  Carlini drag bar w/ new cables, two seat s everything polished or chrome,alum.wheels w/matching brake kit. Vance an Hines Two into one header.Tires like new

Custom built from the ground up chopper,  Built 2008 Hard tail,All matte black body and frame with a custom springer front end. Jesse James custom tankHarley 96SS motor with open cam shafts, Engine was rebuilt just 3000 miles ago.320 on the rear and Custom mini pipessolo alligator skin seatPerfect amount of positive rake on the front end for a super stable ride without sacrificing the chopper design Everything about this machine is fully custom, beautiful detail small details throughout the whole bike. Definitely one of a kind!!  I will be uploading more pictures in the next day if you have any quesions feel free to email me. The bike is located in San Diego and can be shipped anywhere as long as wining bidder pays for all transport costs. 

 This custom soft tail motorcycle was built in 2006 by Loren Graham, owner of G & S Cycles of Orchard Farms, Missouri. It is 9ft. 8in long with a 47 degree inverted front end rake.

I'm selling this bike for a friend who would like to keep it,but could use the money for another project that he is now involved in....This bike has only been rode a little over 3000 miles since Kevin built it.The engine in the bike was supplied by me and is a low mileage 2003 twin cam 88 engine that was taken out of my Harley bagger in 2004 when I installed a 103....The carb is a CV that has been bored to 42 mm and modified by a shop back east....The bike gets better mileage than stock and has a huge power difference over stock because of this carb....I use these carbs on Harleys that I tune and love them...The engine sits in a Daytech frame,has VHR exhaust,and uses a 6 speed trans...The bike also has a digital speedo,cutom paint,belt drive and lots of chrome...We rode about 1400 miles together a few years ago,to Reno,Nevada and back,so we traded bikes for a while...I can tell you first hand that the bike is a pleasure to ride and does everything well...For any further information call Kevin at 909 214-1846...