2014 Ducati Monster on 2040-motos
Ducati Monster tech info
Ducati Monster description
This Top Level Fuller Moto Street Tracker custom is built off the same JIG as the Lloyd Brothers Ducati AMA flat track team uses to compete with! You will not find a better Street or Flat Tracker on the market that can go on the street or track!
Fuller Moto made 3 Chromoly frames for the Lloyd Brothers team this year that were competitive. Race weight which is similar to this bike runs around 315 lbs! Bryan Fuller and his crew at Fuller Moto is making a limited edition of 10 Ducati Street Trackers and this is the number 1 available of the series! Breather exits through the frame and behind the number plate at the neck! Simply put a K&N filter on there and she's done. Steering stops are already in place. The Fuller Tracker frames will fit any Air Cooled Ducati of the Modern Era. Definitely mid-80's until the modern day. Ducati Scrambler wheels and tires look really nice on these frames too! Rear swingarm is a modified SECA 2 unit shortened to fit and shock mount added. This bike started with an 803cc crate motor with zero miles direct from Ducati....clean as a whistle! We have a MicroTec ECU and most all the wiring to make the bike run. Our local Duc Shop has a tune that should get the bike up and running too! Oil cooler has been mounted and lines are already there. Exhaust is 2" Stainless Steel hand cut into the shapes as you see an TIG welded into place. Lightweight Siegl Aluminum Racing Flanges are light and super cool looking! Cone Engineering Stainless Steel Reverse Cones are the first set out of the factory. Bitchin! Wheels are from Dubya USA and use KTM type Talon Billet Pro hubs and Stainless Steel spokes. Wheels are 19" front and rear, they're lightweight and fit perfect. Tires are Vee Rubber 294 Street Tracker DOT. Spacers have been made for the wheels and brakes and are already in place ready to go. Front end is an Ohlins FG511 Inverted Fork with a TTX Racing fork Cartridge Kit. Clamps are from Attack Racing. Fox Shock in the rear for now but it needs a different spring rate which we can provide. Brembo M50 Caliper and EBC 320mm Rotor fits perfectly. Frando Rear sets are in place already. Handlebar has a Billet Riser Custom and Pro Taper Factory Bar. Rear rotor and Caliper are Brembo KTM units. Tank and Tail are the same Glass pieces used by Lloyd Brothers Race team except the number plate is trimmed a bit. Tailight is a Jesse Spade unit that fits very nicely. We can sell this bike in many different packages. Pictured bike is as is mainly mocked up with most of the pieces for $15K. We can provide just a frame, to roller, to complete bike. Frames are going for $3000, Swingarms $1000, Bodywork $1000 for example. Finished bad ass bike running tested, tuned, painted, to Fuller Level is $25,000 USD. Not the cheapest on the market, but definitely the best! How many customs can you buy with a race tested frame? |
Ducati Monster for Sale
- 2007 ducati monster(US $3500)
- 2012 ducati monster(US $8000)
- 2014 ducati monster 696 abs(US $6,999.00)
- 2010 ducati monster(US $26000)
- 2013 ducati monster(US $8,995.00)
- 2005 ducati monster(US $9600)
Moto blog
"It's up for auction but I want £48,500, no offers"
Fri, 21 Aug 2009THIS 142-MILE BEAUTY'S up for auction on eBay right now, with the bidding standing at £20,000. The road-going MotoGP replica comes with additional extras including: a full factory Termignoni hand made Titanium System with carbon undertray, rear seat cowl and dECU upgrade (rear exit and side exit pipes), factory Ducati carbon hugger, Ducati Double Race Screen, factory fitted Digital Quickshifter, factory race quick release fuel cap and comes with a two-year warranty. The owner has a Ducati-related number plate which can be negotiated into the deal.
2015 Ducati Scrambler Spied + Video
Wed, 11 Jun 2014Just days after Ducati officially confirmed it will introduce its new Scrambler this fall comes a spy video of the new bike undergoing some regulatory testing at Ducati’s Bologna factory. Filmed by spy image agency BMH Images, the video provides a fairly good glimpse of the Scrambler, albeit with all sorts of testing equipment and at times a large aluminum shroud (listen to it scrape the ground at the 16 and 43-second marks). Get the Flash Player to see this player.
Ducati 1199 Panigale on the Podium in Superstock 1000 Debut – Video
Tue, 03 Apr 2012We’ve already reported on the Ducati 1199 Panigale’s domestic racing debut (and first race victory) but the 1098 successor has finally made its international racing debut in the FIM Superstock 1000 Cup. Barni Racing‘s Eddi La Marra captured pole position on the Ducati 1199 Panigale and led for the first six laps before the race was red-flagged after Team Brazil racer Heber Pedrosa crashed his Kawasaki ZX-10R. The race was restarted as a five-lap sprint.
Ducati Monster by State
| Ducati Monster by City
| Ducati Monster by Color
|