Bultaco All Motorcycles

Used Lucas tail light lens for Bultaco Metralla Mk 2 or other. Has one tiny crack in bottom edge seen in third photo ( can be glued) otherwise great original condition. ( no cracks by mounting screws as they often get) Please examine pictures carefully as what you see is what you will receive.

Cash Paid! I am always buying vintage motorcycles and parts Fair prices paid, travel nationwide Description 6 3/4" on center 35 mm   Satisfaction Guaranteed! All parts listed as NOS are genuine ex-dealer stock and guaranteed NOS.

This is an extra swing arm that came with my 1978 Bultaco Pursang 370. Measures 20 1/2' from end of swingarm to center of pivot hole. 5th picture shows minor damage from chain, otherwise it looks to be in good condition.

Original not a reprintWill combine shipping7 pages

THIS IS A BRAND NEW AFTERMARKET BLUE FRONT AND REAR FENDER SET FOR THE BULTACO 198 & 199 250 & 350cc MODELS. WILL ALSO FIT SOME OSSA AND MONTESA MODELS. IN NICE SHAPE WITH NO DAMAGE.

Cash Paid! I am always buying vintage motorcycles and parts Fair prices paid, travel nationwide Description Horn does not work   Satisfaction Guaranteed! All parts listed as NOS are genuine ex-dealer stock and guaranteed NOS.

Cash Paid! I am always buying vintage motorcycles and parts Fair prices paid, travel nationwide Description From unknown make/model Bore ID is roughly 49.30 mm   Satisfaction Guaranteed! All parts listed as NOS are genuine ex-dealer stock and guaranteed NOS.

New old stock chain guide.

    ALUMINIUM ALLOY PETROL FUEL GAS TANK BULTACO PURSANG 360 + FILLER CAP @ ECspare Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description NEW ALUMINUM ALLOY PETROL FUEL TANK CAP WITH LOCKABLE CAP. The tank shown is custom made in India with aluminum sheet to exact specs of the original tank. The tank is supplied with a lockable filler cap, You cant fit a original cap of Bultaco tank on this.

A couple very tiny pit spots on the chrome but should polish up nice..By it's looks I am doubtful if this piece was ever mounted but probably just kicked around a garage for years..Pictures are accurate...Thanks..

Please Click Here to Check out My Other Items For your consideration is a 1970 - 1976 Bultaco Matador MK3 250 AHRMA MX Vintage Fuel Gas Petrol Tank All Parts were removed from a 1970 Bultaco Matador MK3 250 Frame # M260 Engine # M-2601615 I am not a Bultaco expert and can not guarantee all these parts to be original to this bike. Shipping is $34.99 in the Lower 48 US States via United States Postal Service. Hi/AK/PR/APO AP may be higher.

1970's original Bultaco kick stand in great shape. All sales are final. I only accept PayPal.

Hello - There are original tools from Bultaco. A very early and unique spark plug socket from an early 60's Bultaco kit. Auction is for all you see, no bag or roll.

solid with good hinge and snap

either matador 200 or Sherpa 250. engine ser. no.

lever and yoke

VINTAGE BULTACO EXHAUST SYSTEM WITH BOLT ON SILENCER. NOT SURE OF YEAR AND MODEL BULTACO THIS WILL FIT. 

there is no title,,  very low miles and the condition of the  bike overall and motor seems to bear that out..  SOUNDS GREAT,,   this bike still has the original femsa battery under the side cover,,   tires are crap,, some rust peppering above the sliders but not bad..  tank is solid    original controls apart from the new throttle cable I made..     even has the oem ( plastic) brake switch for the front brake ..  great bike for a restoration..  looks to have stainless spokes up front with very large gauge spokes in zinc for the rear..   storage for a reasonable period is fine..  pick up in person if your coming to florida for the winter or bike week..   motor starts on a kick or two , settles in to  a easy idle..   gearbox & clutch work as designed..  

1974 Bultaco Alpina runs and looks great. I am weeding out my collection of vintage bikes this bike runs and looks great for the year no damage everything works as it should no disappointments any questions please ask I can assist with shipping I am located in Amherst New Hampshire $300 deposit due immediately at auctions and balance due within five days

You are bidding on one 1972 73 BULTACO PURSANG MK6 125 IS IN GOOD SHAPE WILL NEED TO BE GONE THROUGH, kicks freely, please look at all of the photos, bill of sale only, thank you.

THERE IS NO TITLE.  WILL PROVIDE BILL OF SALE. **** THE GOOD,   BIKE STARTS, IDLES, REV'S THRU THE RANGE & THE GEARBOX WORKS AS DESIGNED.  NO FUNNY NOISES....    *** THE BAD ; EVERYTHING ELSE I GUESS  !  ---------------------------------------------------------------------------------------  NO BROKEN FINS , MATCHING NUMBERS, TANK IS IN GOOD SHAPE,,  FORKS ARE STRAIGHT & WORK PROPERLY,,   RIMS LOOK VERY STRAIGHT ,  CHAIN & SPROCKETS ARE NOT WORN DOWN TO A NUB IF THAT MEANS  ANYTHING...  SEAT IS IN GOOD SHAPE & WILL TAKE A RE-COVER,    STORAGE FOR A REASONABLE PERIOD IS FINE.    PICK UP IN PERSON IF IN FLORIDA OVER THE WINTER OR BIKE WEEK..,,,,,HELP WITH SHIPPING IS AVAILABLE FOR BUYER..     PLEASE OBSERVE OUR PAYMENT DETAILS, THANKS   

  SHAMROCK CYCLES SOURCE 1975 BULTACO PURSANG MK8 250CC HELLO!  Shamrock Cycle Salvage is proud to present for your bidding pleasure a 1975 Bultaco Pursang 250cc motocross racer. This bike was raced shortly in the 1970s before being stored for many years. Bike has very strong compression but no spark.

I believe this is a 1968 Bultaco Matador. It is a radical 250cc two-stroke monster. Very fast.

Up for bid is a Volcano head Bultaco Metisse. Frame and motor have matching numbers. Frame B1101133, motor M1101133.

You are bidding  on a used clutch cover   for a Bultaco Sherpa T 250.  Looks to be in ok used condition and  has some scratches see pictures.  Comes with everything you see in pictures. Please look at all pictures for more details.  These are used parts and I strive to describe as best of my ability if I miss something it is an honest mistake and will make it right.  Please email me with questions as soon as you can for I am on call for work and can go out of town at any time so I do not get to a PC everyday.   Payment must be received in full within 7 days of the end of the auction unless otherwise agreed upon. Please read entire description and ask any questions before bidding.

This is a brand new Wiseco piston. This is listed to fit 125cc Bultaco models. This includes the piston, piston rings, circlips and instruction sheet.

This Dunlop tire and 3 more are one I took off when new and are in like new condition.  No dry rot or cracking they have been stored properly for over 40 years. I have 4 total but one I will keep to go on my Bultaco Sammy Miller Replica.

Complete decal set collection for a Bultaco Metralla Mk2 includes tank decals, oil and storage tank, "made in spain" for fuel tank ( not shown), Betor decals, Akront decals, Oil stroke cards, Oil cc decals, etc. Some very hard to find. Includes all shown plus the Made in Spain one mentioned.

Up for auction are 4 vintage handlebars. Most likely from a Maico but could be from an AJS or Husky. I'm selling altogether because it's somewhat of a pain to find boxes to ship.

BULTACO CAMPERA MK2 175  FOR PARTS OR REBUILD, BILL OF SALE, SOLD AS IS. 1969-72 M2800300

Bultaco Alpina frame/swing arm 1973 250    I take PayPal  or a check (which would have to clear first.) Bid with confidence by checking my feedback out just click on the # next to kev_uk_usa

Here is a happy specimen of a twin shocks old school trials bike. A 1980 Bultaco 350 cc Sherpa-T with matching numbers and in quite good condition. I think the bike has seen its share of usage but was lucky enough to have caring owners.

RUNNING BIKE, DOES EVERYTHING IT IS SUPPOSED TO DO.   HAS BEEN GETTING ALITTLE HARD TO START BUT ONCE STARTED RUNS OUT WELL.. ,,,,,,,,,,,,,, IDLE IS GETTING ABIT DODGEY SO CRANK SEALS ARE IN THE FUTURE.,,,,,,,,,,,,,  NICE THING ABOUT THOSE IS THEY CAN BE CHANGED WITHOUT BREAKING THE CASES.   RECENT PRIMARY CHAIN ..........   KEY FOR TOOLBOX,,, ******TITLE,,,,,,,,,, GREAT BIKE FOR A RESTORATION;  VERY ORIGINAL & UNFUTTERED WITH...  STORAGE FOR A REASONABLE PERIOD IS FINE , PAYMENT VIA CASH OR POSTAL MONEY ORDERS ONLY

Bultaco motorcycle. Not running.  Has been parked in garage for several years.Plastic is cracked.

1977 Bultaco Sherpat model 183 trials bike runs and rides as it should. Payment do in seven days email with questions or text or call 585 590 9090. Thanks for looking.

Up for auction is a 1971 Bultaco Matador 250cc enduro motorcycle. I purchased this bike in a package deal with a few other motorcycles. There is no title for this bike, a bill of sale will be provided to the winning bidder.

 Bultaco Exhaust Gasket...square...new   NOS OEM.  49mm diameter.  Old dealer stock.  I believe the part # is 11-17-001.  Kindly check photos.

BULTACO MATADOR  Fiberglass seat pan Vintage early 1970's Red fiberglass seat pan has 2 cracks in right side, 2 cracks and a chunk on the right side. ( Front part is cracked on both sides and down the middle and is barely hanging on. ) See pics Sticker on bottom: 277 See pics

Used OEM Chain Tensioner.  Kindly check photos.

The Buzzard continues to try and offer parts for bikes the others either don't have or don't care about! A new set of REAR Wheel bearings to fit most of the Bultaco models with drum brakes 1967-81.....you will get one set - enough to do one wheel...I also offer all kinds of other Bultaco & Vintage Bike Stuff...... shipping in the USA will be $3 - other Countries would be $8 thru the USA Mail Unlike Others - the Buzzard DOES consider himself an Expert in this area after working on Motorcycles / ATV's / Snowmobiles / Watercraft since the early 1970's - and his opinions are based on years of Professional and personal knowledge of what happens in Real World Use - so PLEASE Contact me with any questions you may have!....

Description: Off an early 70's Bultaco. Probably, Sherpa or Alpina. 3/4" diameter.

NOS OEM.  Only wear from shelf life.  240mm long; 14mm diameter;14mm thread.  Could fit other models.  Kindly check photos.

GOOD USED CONDITION  INTERNATIONAL BUYERS YOU THE BUYER ARE RESPONSIBLE FOR ANY TAXES OR DUTIES .

Super cool and vivid vintage image of a bultaco alpina. printed with sublimation, won't crack peel fade or shrink. great gift for yourself or a vintage bultaco friend.

BULTACO MATADOR side cover Vintage early 1970's Some small chips and wear around edges No cracks that I can see, very solid nice part Has a 114 sticker on the back See pics

Description: Rusty but solid. Not sure of year. Pictures are part of the description please look at them closely and if you have questions or need more pics, let me know.

BULTACO STAINLESS STEEL PRIMARY FILLER CAP THIS IS A REPLICA OF THE PRIMARY CASE FILLER CAP AS USED ON LATER ALPINA ,SHERPA ,PURSANG ,MATADOR, LOBITO,ETC I OCCASIONALLY HAVE SECONDS AVAILABLE AT HALF PRICE , THESE MAY HAVE SURFACE MARKS OR DIMENSIONAL VARIATIONS BUT STILL BE SERVICEABLE , PLEASE INQUIRE . INTERNATIONAL P+H WILL DEPEND ON DESTINATION AND WHETHER INSURANCE IS REQUIRED . WILL COMBINE MULTIPLE ITEMS .

NOS  OEM.  Only wear is from shelf life.  275mm long..  17mm diameter.14mm thread.  Could fit other models.  Kindly check photos.

Part #  81-21-217.  Good condition.  Markings Femsa RSA1X-7.Kindly check photos.

You are buying one package of 3 new old stock plastic number plates. 3 number plates are in one package. They are the standard 10-1/2" wide x 8-1/4" tall number plate.

RUBBER Bultaco Sherpa handguards, frontera, Pursang, alpina, lobito... WE HAVE NEW PARTS FOR THIS BIKE BULTACO SPARK. We have over 4000 motorcycle parts SPANISH.

Description: Off an early 70's Bultaco. Probably, Sherpa or Alpina. Some corrosion but restorable.

Description: Off an early 70's Bultaco. Probably, Sherpa or Alpina. Hub had some corrosion.

Please Click Here to Check out My Other Items Up For your consideration is a 1972 Bultaco Alpina 350 AHRMA Vintage Front Axle Bolt All Parts were removed from 1972 Bultaco Alpina 350 AHRMA Vintage Frame #9900718 I am not a Bultaaco expert and can not guarantee all these parts to be original to this bike. Shipping in the Lower 48 US States via United States Postal Service. Hi/AK/PR/APO AP may be higher.

BULTACO CLUTCH ADJUSTER COVER SCREW , STAINLESS , NEW 25 X 1.5 THREAD THIS FITS IN THE THREADED HOLE OVER THE CLUTCH PUSHROD ADJUSTER IN THE MAGNETO COVER OF THE EARLY MODEL BULTACOS.  SUIT ,SHERPA ,MATADOR.METRALLA , PURSANG , ASTRO ,LOBITO ETC.  I  OCCASIONALLY HAVE SECONDS AVAILABLE AT HALF PRICE ,  THESE MAY HAVE SURFACE MARKS OR DIMENSIONAL VARIATIONS BUT STILL BE SERVICEABLE , PLEASE INQUIRE .

BULTACO STAINLESS STEEL GEARBOX FILLER CAP ,  1 OFF THIS IS AN EXACT REPLICA OF THE GEARBOX (AND PRIMARY CASE OF EARLY MODELS) FILLER CAP NORMALLY MADE OF PLASTIC. WILL SUIT ALPINA ,SHERPA ,FRONTERA ,MATADOR. PURSANG , ASTRO ETC.

For your consideration is a nice used ignition cover from a Bultaco Frontera MK10 model 180. The cover is in good condition overall but does show a small amount of chain rash to the tail of the cover and the back side of the flywheel opening seen in the pictures. There are no cracks, breaks or repairs in the cover.

NEW  INTERNATIONAL BUYERS YOU THE BUYER ARE RESPONSIBLE FOR ANY TAXES OR DUTIES .

GOOD USED CONDITION  INTERNATIONAL BUYERS YOU THE BUYER ARE RESPONSIBLE FOR ANY TAXES OR DUTIES .

After numerous requests - the Buzzard FOUND a NEW Throttle and Cable set-up to replace the old style Throttle and original cable for Bikes using the Bing 54 Carb...... A NEW Side Pull Style Twist Throttle AND cable for the Bing "54" carbs that are commonly used on Maico / Husky / CZ / Penton / Bultaco / KTM / Cagiva  and other Vintage bikes.... same one I used on my KTM when I replaced the original sticks-out-in-the-Breeze original set-up!...has a 45 degree bend where it exists the carb ( which I find helps guide the cable forward much more easily )...besides the usual adjustments at the throttle and carb - the cable has another adjuster in the middle section of cable itself as well!...the OUTER cable length is 42 inches with the adjuster all the way in  - and the inner cable is about 6.5 inches longer than the outer cable - it is pictured on a Maico 36mm Bing 54 which is NOT included Note: Not sure if this will work on the 40mm Bing carbs as the inner cable may not be long enough for those Giant carbs!